andrew-theasby
|
| posted on 25/2/11 at 07:03 PM |
|
|
soda blasting - a few questions
Just about to start cleaning my diff and was wondering about soda blasting as im not stripping it for sand blasting. Am i right to think if i mask
the steel off and try to avoid any seals i can blast the alloy case with soda then just swill it off with water and it wont leave any grit anywhere
like sand blasting as it will all dissolve? Also what is the soda and where can i get it from? Thanks
|
|
|
|
|
imp paul
|
| posted on 25/2/11 at 07:10 PM |
|
|
its just bicarb soda or you could use crushed glass as its very fine i just got my car shell done last week with glass i was going to go soda but its
a long job and costs more a pal of mine does it for a living glass £50hr soda £60hr hope this mite help you  and yes soda is very green to use its a
1 hit use as is the glass here is a link to daimos site http://www.vapourblast.co.uk/index.php
[Edited on 25/2/11 by imp paul]
|
|
|
designer
|
| posted on 25/2/11 at 07:44 PM |
|
|
DIY soda blasting here:
http://www.shedworks.eu/projects.html
|
|
|
andrew-theasby
|
| posted on 25/2/11 at 08:38 PM |
|
|
Dont want to use glass or any other media as it leaves a fine dust that no matter how much you blow it out gets into the bearings etc. As far as i
know the soda can be completely dissolved by rinseing so you dont have to dis-assemble things before blasting. Is this right? Thanks
|
|
|
.JPG)
