NS Dev
|
| posted on 18/10/11 at 08:11 PM |
|
|
waterjet cutting, who on here can do it?
I know a few folks on here can get stuff waterjet cut.....
Any ideas on cost for a 4 cyl exhaust manifold flange in 12mm stainless (306 or 316L)
its for a volvo 8 valve redblock by the way. Don't have cad drawing but do have gasket, and can get it scanned and cad'd if needs be or
can post gasket
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
|
|
dave r
|
| posted on 18/10/11 at 08:12 PM |
|
|
andyw7de is your man
I'd love to give my imaginary friend a great big hug,
but this jacket makes it impossible.
|
|
|
40inches
|
| posted on 18/10/11 at 08:22 PM |
|
|
andyw7de is your man + 2
|
|
|
NS Dev
|
 posted on 18/10/11 at 08:28 PM |
|
|
cheers, will message him
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
NigeEss
|
| posted on 18/10/11 at 11:43 PM |
|
|
andyw7de is your man + 3
Done a couple of jobs for me, quick service at very reasonable price.
Time is an illusion. Lunchtime doubly so.................Douglas Adams.
|
|
|
