v8kid
|
| posted on 4/3/15 at 06:33 AM |
|
|
diy hydraulic power pack
Anybody make one? I want to use with engine hoist and press but they seem expensive on eBay.
Cheers
[Edited on 4-3-15 by v8kid]
You'd be surprised how quickly the sales people at B&Q try and assist you after ignoring you for the past 15 minutes when you try and start a
chainsaw
|
|
|
|
|
designer
|
| posted on 4/3/15 at 09:15 AM |
|
|
Are you talking about a simple manual pumped ram or an actual power pack?
|
|
|
v8kid
|
| posted on 5/3/15 at 12:52 PM |
|
|
Hi,
No I want to make an electrically powered hydraulic pump to use with my press and engine crane.
My first thought was to use a power steering pump but they only give around 1200psi and rough calcs show that my existing manually pumped cylinders
are circa 4000psi
Also I can't find any indo on pump rate gal/min or l/s of power steering pumps either so wondered if another forum member had tried.
Cheers!
You'd be surprised how quickly the sales people at B&Q try and assist you after ignoring you for the past 15 minutes when you try and start a
chainsaw
|
|
|
