luke2152
|
| posted on 28/7/16 at 08:03 PM |
|
|
machining favour
Can someone with a lathe do a little job for me for cash or beers.
Need a 36-1 trigger wheel for a bike engine to replace the stock 4 tooth one. I have a suitably sized 36-1 wheel. Stock one needs to be cut back to
leave about 24mm and then the new wheel drilled same size so I can tack weld it in place.
Cheers.
http://s1288.photobucket.com/user/luke_2152/media/20160728_204822_zpspysylqak.jpg.html?filters[user]=136982785&filters[recent]=1&sort=1&o=
0
|
|
|
|
|
theprisioner
|
| posted on 29/7/16 at 08:22 AM |
|
|
I don't understand fully, I assume you want the existing wheel turned off and the new one bored out and fitted to the old shaft? If you are not
in a hurray and the distance (Scotland) is not an issue then drop it off in the post.
http://sylvabuild.blogspot.com/
http://austin7special.blogspot.co.uk/
|
|
|
luke2152
|
| posted on 29/7/16 at 02:22 PM |
|
|
Yes exactly as you describe. PM sent
|
|
|
CosKev3
|
| posted on 29/7/16 at 04:40 PM |
|
|
Being nosey, whee did you get tell 36-1 wheel from and what diameter is it please? 
|
|
|
luke2152
|
| posted on 29/7/16 at 05:54 PM |
|
|
quote:
Originally posted by CosKev3
Being nosey, whee did you get tell 36-1 wheel from and what diameter is it please?
Its from the rather un-originally named trigger-wheels.com. Mine is 51mm diameter -the smallest but they do a variety of sizes.
|
|
|
CosKev3
|
| posted on 29/7/16 at 08:17 PM |
|
|
quote:
Originally posted by luke2152
quote:
Originally posted by CosKev3
Being nosey, whee did you get tell 36-1 wheel from and what diameter is it please?
Its from the rather un-originally named trigger-wheels.com. Mine is 51mm diameter -the smallest but they do a variety of sizes.
Nice one thanks
|
|
|
