MikeR
|
| posted on 14/7/19 at 08:43 PM |
|
|
where to get small v belts for pillar drill
I'm trying to find a source of small v belts for my pillar drill. The belts are non standard - 7mm wide by 5mm deep. Both belts are short, 448
and 462 (approx, can't remember exactly right now)
Where can I buy replacements? Tried googling and can't find anything. Ideally I'd like online as I work silly hours.
|
|
|
|
|
r1_pete
|
| posted on 14/7/19 at 09:52 PM |
|
|
They sound the same as the ones in my Clarke drill, try Machine Mart, I think you can download parts lists.
|
|
|
40inches
|
| posted on 14/7/19 at 10:11 PM |
|
|
If it's the Clarke type I got a pair a year ago,
Simpl
y bearings
|
|
|
r1_pete
|
| posted on 14/7/19 at 11:27 PM |
|
|
Thats good to know Dave, I think mine is getting ready for a set, I’ve used Simply a lot for bearings and bushes, great service....
|
|
|
nick205
|
| posted on 15/7/19 at 07:55 AM |
|
|
Do Clarke themselves not sell spares or maybe provide a list of companies that do?
|
|
|
MikeR
|
| posted on 15/7/19 at 08:11 AM |
|
|
My problem is the sizes are very specific. Being naïve I've been looking for those exact sizes. Simple bearings have standard sizes. I'll
give the closest standard sizes a go. Does it matter if the current belt is flat and the new one is ribbed?
|
|
|
nick205
|
| posted on 15/7/19 at 09:39 AM |
|
|
Ribbed and flat belts will have a different surface area of contact between the belt and pulley so the ribbed belt could slip on the pulley wheel more
easily than a smooth belt.
|
|
|
