BenB
|
| posted on 29/6/20 at 08:33 AM |
|
|
Will any places other than BOC refill a BOC cylinder?
Upgraded my welder at the weekend via Ebay. The listing included a rather large BOC Argoshield cylinder (sadly empty). My understanding is that BOC do
yearly rental which wouldn't be cost effective for me. Would a fire extinguisher type place refill it or would the fact it's marked
argoshield and boc property be an issue??? Otherwise what's the best option? Remove the reg and take the rest to the tip? Or weigh it in next
time I'm getting rid of scrap metal (though they may be iffy if it was originally clearly boc's!!!).
|
|
|
|
|
r1_pete
|
| posted on 29/6/20 at 08:44 AM |
|
|
BOC will refill it, but will start charging you rental, all bottle serial numbers are recorded against the renter, Some very old bottles are not on
the database, hence how you got yours, safest way to dispose is to drop it off at a BOC depot, just tell them how you got it and walk away.
I doubt you will find anyone else to fill it.
See if you can still get a Beetle scheme rental from BOC, its about £40 a year for my 20L argo light.
I do find, size for size BOC gas lasts longer compared to the hobby suppliers, probably a better 'fill'.
I'm off to BOC for some fills this morning I'll ask if the Beetle DIY scheme is still active.
|
|
|
coyoteboy
|
| posted on 29/6/20 at 10:15 AM |
|
|
The "beetle" discount still exists but it's called the "hobby" discount and it's roughly half published costs.
Works out cheapest in the end, for an infrequent user.
The caveat is you have to collect and drop off the cyls yourself, they won't deliver.
[Edited on 29/6/20 by coyoteboy]
|
|
|
MikeR
|
| posted on 29/6/20 at 01:59 PM |
|
|
Find a local welding supplies place and see what they do. I have a co2 cylinder which I pay about 50 pounds to get refilled. I've had it
refilled once in 10 years as I'm not doing a lot of welding.
(Ok, they swap it for a full bottle - it's the exact same bottle refilled)
|
|
|
rusty nuts
|
| posted on 29/6/20 at 04:53 PM |
|
|
Go to your local Hobby Welder gas suppliers , possibly a motor factor, pay a refundable deposit plus the fee for the gas, easy and convenient plus
motor factors often deliver
|
|
|
Big T
|
| posted on 29/6/20 at 07:22 PM |
|
|
I’ve found Adams Gas to be the most cost effective.
I have an air products 90L bottle which I acquired full some years ago, it’s not unfortunately run out and Adams Gas was the most cost effective. Plus
my local supplier is only 10 minutes down the road.
|
|
|
rusty nuts
|
| posted on 30/6/20 at 07:31 AM |
|
|
quote:
Originally posted by Big T
I’ve found Adams Gas to be the most cost effective.
The problem with Adams Gas is the lack of dealers, the nearest to me was 20 miles away which was a pain, he has now retired and the now nearest is 45
miles each way . Hobby weld seems to be sold by most motor factors and they deliver. When my Argon bottle is empty it is going back to Adams gas
|
|
|
nick205
|
| posted on 30/6/20 at 07:53 AM |
|
|
quote:
Originally posted by rusty nuts
Go to your local Hobby Welder gas suppliers , possibly a motor factor, pay a refundable deposit plus the fee for the gas, easy and convenient plus
motor factors often deliver
A lot of Motor Factors supply welding gas. Most Motor Parts Direct branches supply it on a "refundable deposit for the clinder + pay for the
gas" system. I've not used them, but my local branch in Winchester do this. My neighbour has got his MIG gas from them for a few years.
I think a few of the local garages that offer MoT welding get their gas from them as well.
|
|
|
fazerruss
|
| posted on 30/6/20 at 08:55 AM |
|
|
There is also SGS (South west gas supplies) who have distributers all over the country. They do most of the industrial gases on a deposit scheme.
Currently its about 80 quid for a 20 litre cylinder plus what ever gas you want. I now have a pure argon and an oxygen. Might gas is probably around
50 quid for a fill. They are filled to same pressure as BOC (300bar). If you are a member of the mig welding forum you also get a £20 refund on your
first cylinder deposit.
Edit: their website will tell you of nearest stockists
I'm not affiliated with the company, just a happy customer.
[Edited on 30/6/20 by fazerruss]
"if assholes could fly this place would be an airport"
|
|
|
BenB
|
| posted on 30/6/20 at 05:52 PM |
|
|
okay, great, thanks for the info.
Sounds like I might just have to get rid of the cylinder and get a proper one. We use BOC for our liquid nitrogen at work so I might see if the main
who comes to fill that up will take the cylinder back to BOC depot. Otherwise I'll just let them know they can come and collect it if they want
to.
To be honest it's that big I reckon even if they did fill it, it'd be a lifetime's worth of Argoshield. It's about 6 foot
tall. Weighs a ton.
|
|
|
nick205
|
| posted on 1/7/20 at 09:44 AM |
|
|
quote:
Originally posted by fazerruss
There is also SGS (South west gas supplies) who have distributers all over the country. They do most of the industrial gases on a deposit scheme.
Currently its about 80 quid for a 20 litre cylinder plus what ever gas you want. I now have a pure argon and an oxygen. Might gas is probably around
50 quid for a fill. They are filled to same pressure as BOC (300bar). If you are a member of the mig welding forum you also get a £20 refund on your
first cylinder deposit.
Edit: their website will tell you of nearest stockists
I'm not affiliated with the company, just a happy customer.
[Edited on 30/6/20 by fazerruss]
Checking the SGS website it links back to Motor Parts Direct in Winchester as their nearest stockist to me.
|
|
|
UncleFista
|
| posted on 1/7/20 at 05:34 PM |
|
|
quote:
Originally posted by MikeR
Find a local welding supplies place and see what they do. I have a co2 cylinder which I pay about 50 pounds to get refilled. I've had it
refilled once in 10 years as I'm not doing a lot of welding.
(Ok, they swap it for a full bottle - it's the exact same bottle refilled)
A bit "left field" but if you have a hydroponic shop near you, they sell CO2 for growing plants and the last refill (exchange) I got was
£20.
Tony Bond / UncleFista
Love is like a snowmobile, speeding across the frozen tundra.
Which suddenly flips, pinning you underneath.
At night the ice-weasels come...
|
|
|
paulf
|
| posted on 1/7/20 at 05:51 PM |
|
|
I have used CO2 fire extinguishers for years,a local extinguisher company used to sell converted bottles with a screwdown tap and no Dip tube but
eventually stopped doing so, I think on health and safety grounds propmted by there insurance.
I acquired a couple of 10 kg bottles from a fire suppression system and used them for a few years and nowadays I use CO2 extinguishers with an adaptor
to take a standard regulator and pin down the handle to use .They do dispense liquid but as long as the flow rate is not to high the regulator seems
to cope ok.
|
|
|
coyoteboy
|
| posted on 2/7/20 at 01:30 PM |
|
|
Local pub gas refiller refills my CO2 tank for MIG, £12 a fill. You might find someone willing to do the same but they may want to run inspections on
the tank first.
|
|
|
.jpg)
.jpg)
