fesycresy
|
| posted on 3/11/05 at 04:30 PM |
|
|
R1 Clutch Springs
I've tried PDQ for uprated Barnett clutch springs, but they're saying they only do a complete conversion kit at £120, not just springs.
Can anyone point me in the right direction ?
Cheers, Lyn.
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
|
|
Jasalarms
|
| posted on 3/11/05 at 06:07 PM |
|
|
Best thing to do is double up on the spring or diaphram, have done this on mine, and it does work.
Think others might have done this too
|
|
|
colibriman
|
| posted on 3/11/05 at 06:10 PM |
|
|
Yamaha is your best bet for an additional standard one, think they are about 20 - 30 quid
need a bike engine? - www.colibriman.com
SVA ready Mk Indyblade possibly for sale.....if the offers good...!
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Jasalarms
|
| posted on 3/11/05 at 06:16 PM |
|
|
£18 if i remember 
|
|
|
fesycresy
|
| posted on 3/11/05 at 06:39 PM |
|
|
When you say double up, do you mean one spring on top of the other, as I've done many bike clutches and as I remember I wouldn't have been
able to do this with any of them.
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
Jasalarms
|
| posted on 3/11/05 at 07:04 PM |
|
|
Yep one on top of the other
|
|
|
fesycresy
|
| posted on 3/11/05 at 07:30 PM |
|
|
Thanks for that.
Only used to doing motocross bikes, hence the confusion.
Cheers, Lyn.
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
.jpg){kind=avatar}
