dnmalc
|
| posted on 18/5/06 at 06:30 AM |
|
|
M12 left hand thread
Help
I am trying to make up the turn buckles in Rorty's IRS design but I cannot find a source of M12 LH threaded bushing or taps any suggetsions.
Outer diameter is not an issue so long as it is over 20mm.
|
|
|
|
|
Mal
|
| posted on 18/5/06 at 06:47 AM |
|
|
LH Taps
Try TOY Trading in Droitwich.
It is a small engineer's merchants. They got me some LH M5 taps quickly.
The phone nmber is 01905 794979.
Regards,
Mal
|
|
|
BKLOCO
|
| posted on 18/5/06 at 06:56 AM |
|
|
I've got some M12 X 1.75 LH taps and a die you could borrow. But I would need them back within a week or two.
Let me know if interested and I'll post em to ya!
Experience is what you get when you don't get what you want!!! 
|
|
|
russbost
|
| posted on 18/5/06 at 07:07 AM |
|
|
I'm sure Merlin Motorsport do LH thread bushing for rose joints as I would have thought any rod end joint supplier would also do.
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
02GF74
|
| posted on 18/5/06 at 10:14 AM |
|
|
make sure you get the right pitch.
|
|
|
.jpg)
