mazmm5
|
| posted on 2/3/07 at 10:53 AM |
|
|
Media Blasting Cabinet Plans
Does anyone have plans for a Media Blasting Cabinet? Maybe a list of parts required along with an online retailer who sells said parts?
|
|
|
|
|
Bluemoon
|
| posted on 2/3/07 at 11:08 AM |
|
|
Like this:
http://www.uzitalk.com/forums/showthread.php?t=24448
I think Frost Auto sell a kit...
[Edited on 2/3/07 by Bluemoon]
|
|
|
iank
|
| posted on 2/3/07 at 11:12 AM |
|
|
Not ultra cheap, but you can get a kit of all the bits+plans from Frost. Only missing the plywood for the cabinet and a compressor.
http://www.frost.co.uk/item_Detail.asp?productID=8066&frostProductName=DIY%20Blast%20Cabinet%20Kit
[Edited on 2/3/07 by iank]
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
mconley3
|
| posted on 2/3/07 at 12:06 PM |
|
|
Here's a good one.
http://www.ford-trucks.com/article/idx/5/007/article/Build_Your_Own_Grit_Blasting_Cabinet.html
Mark
|
|
|
Confused but excited.
|
| posted on 2/3/07 at 02:50 PM |
|
|
I got my blast gun and grit from these people and found them to be very helpful:
Anglo Scot Abrasives, 01942 - 270729 or asasales@blueyonder.co.uk
They supply the MoD and all sorts of bodies, but are still very helpful to individual users and sell kits of different sizes.
Well worth a call/e-mail.
Tell them about the bent treacle edges!
|
|
|
mazmm5
|
| posted on 2/3/07 at 06:00 PM |
|
|
Thanks to all who replied
The Frost kit is kind of like what I was looking for. I planned to use sheet metal instead of plywood though. I'm thinking something large
enough to hold an 18" wheel.
|
|
|
