takumi
|
| posted on 21/12/07 at 03:51 PM |
|
|
Making your own setscrews
Ive have a bit of a head ache finding..
Counter Sunk Socket Cap Set Screws in a M12x1.5 fine. (bell housing to gearbox)
My local fasteners specialist says no one makes them, and I could find anything online either..
So I had to modify some same head 'bolt', cut off the threaded part, and retap the blank shaft to a M12 fine thread.
All came out better than I hoped.. I had to heat them up a bit with a gas torch to help take off the hardness on the surface , as they were 10.9
rating !
well chuffed. 
[Edited on 21-12-07 by takumi]
RobinHood 2B 2.0i pinto, Keihin 38mm Carbs, lightened flywheel, O'Mori remote filter kit, 10 row oil cooler. Modified head, 10.2cr, special
valves FR22 cam, 4- 1 header.
|
|
|
|
|
Ivan
|
| posted on 21/12/07 at 04:37 PM |
|
|
Neat  - justifiably chuffed
|
|
|
Alan B
|
| posted on 21/12/07 at 08:42 PM |
|
|
I wish I'd have known...I have a box of those doing nothing......
not really...but someone usually comes along with that kind of offer....
Nice job, should work fine.
Alan
|
|
|
Confused but excited.
|
| posted on 21/12/07 at 11:41 PM |
|
|
Give yourself a big pat on the back.
Tell them about the bent treacle edges!
|
|
|
blakep82
|
| posted on 22/12/07 at 12:21 AM |
|
|
lovely job!
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
chriscook
|
| posted on 22/12/07 at 11:11 AM |
|
|
Are you intending to re-harden them?
|
|
|
nasty-bob
|
| posted on 22/12/07 at 12:20 PM |
|
|
Did you try Stig Fasteners. I believe they will do specials aswell although they stock
many types that are usually hard to get. I've used them and they were really good, quick delivery and the prices are pretty good too.
Cheers
|
|
|
