blakep82
|
| posted on 29/6/08 at 02:10 PM |
|
|
rehmann tig and plasma cutter machines
silly question perhaps, but some of the machines on ebay say inverter arc plasma cutter, while the tig machines are tig inverters...
are they the same? i quite fancy a plasma cutter, and there seems to be some really cheap at the minute. maybe worth a shot, but will i get the bonus
of being able to use it as a tig welder too?
I'm not very familiar with either of these machines. was just watching some program about demolition derbys lol and a guy had a plasma cutter.
was very impressed. already got a compressor so no worries there
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
|
|
tks
|
| posted on 29/6/08 at 02:18 PM |
|
|
inverter means that the amps are generated through invertering with big fets/IGBTS etc. to the requiered voltage etc. etc. non inverter would be an
huge weiging machine with an transformer....
so to answer your question inverter is a method it doesn't stand automaticly for TIG welding....
Tks
The above comments are always meant to be from the above persons perspective.
|
|
|
blakep82
|
| posted on 29/6/08 at 02:23 PM |
|
|
ah, cool  thats what i suspected but wasn't sure.
thanks 
i'll keep an eye, at the moment there's one with a single bid of £1, finishing tomorrow. seems worth a shot, and another the next day with
no bids
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
big_wasa
|
| posted on 29/6/08 at 05:41 PM |
|
|
yep ive got one
|
|
|
blakep82
|
| posted on 29/6/08 at 06:59 PM |
|
|
you've got what? a tig/arc/plasma all in one machine?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
big_wasa
|
| posted on 29/6/08 at 09:10 PM |
|
|
yep
If you want any info on it give me a shout
|
|
|
blakep82
|
| posted on 29/6/08 at 09:22 PM |
|
|
cool cheers
i'd probably not end up using it for TIGing though. too much argon 
was it expensive though?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Browser
|
| posted on 30/6/08 at 07:59 PM |
|
|
He won't tell you 'cos his missus might find out!
I can, however, vouch for the fact that it works brilliantly
|
|
|
blakep82
|
| posted on 30/6/08 at 08:39 PM |
|
|
hmmm, so they are expensive then lol
damn, i forgot to have a look at the cheap one finishing at 8 tonight...
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Peteff
|
| posted on 30/6/08 at 10:18 PM |
|
|
They are £337 buy it now with £10.50 P&P on ebay aren't they?
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
blakep82
|
| posted on 30/6/08 at 10:32 PM |
|
|
there's a ones to bid on now and then, there was pne i saw last nite, with a £1 bid, and finished today at 8pm, i forgot to keep an eye on it...
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
