caber
|
| posted on 16/8/08 at 06:21 PM |
|
|
Nylock nuts -re-using
So we all know Nylock nuts are only supposed to be used once. I am just interested in how many of us actually follow this practice
|
|
|
|
|
Humbug
|
| posted on 16/8/08 at 06:23 PM |
|
|
Option 6: I will reuse them if a) they don't look too knackered and b) it's not in a critical place (e.g. suspension!)
|
|
|
SeaBass
|
| posted on 16/8/08 at 06:26 PM |
|
|
I tend to build things up using plain nuts, then once in final assembly I'll add the Nyloc. I'm a bit OCD with nuts and bolts I remove
from older things - they tend to go in the round file on the floor. I do have box I've got "last resort reuse only" if they are
unusual threads.
|
|
|
BenB
|
| posted on 16/8/08 at 06:27 PM |
|
|
Option 6 for me too
|
|
|
designer
|
| posted on 16/8/08 at 06:30 PM |
|
|
If it can't be turned by hand; re-use it.
|
|
|
worX
|
| posted on 16/8/08 at 06:40 PM |
|
|
Option 1.
Buy a small pack of various size nuts/bolts at the start of the build or upcoming project and you will never have the need to re-use them.
Also this way the replacement ends up costing just a couple of pence...
I get my stuff from http://rivetwise.co.uk they are great blokes there and send stuff straight away...
Steve
|
|
|
tcr
|
| posted on 16/8/08 at 06:44 PM |
|
|
option 5 then option 1 after wot ever the bolt was used for has fell off
MK MIDI ZX10R
http://www.facebook.com/media/set/?set=a.4393256076054.2182513.1427988207&type=1&l=64c91c3c17
why isnt anything simple!!!
torquetune.co.uk
nrpexhausts.co.uk
|
|
|
thunderace
|
| posted on 16/8/08 at 09:35 PM |
|
|
if you cant turn them off and on with your hand there good.
|
|
|
Canada EH!
|
| posted on 17/8/08 at 12:02 AM |
|
|
Nylock nuts-re-using
I spend a lot of time around aircraft, which is were this product came from, from my experience the only ones who chuck the nuts after one use are
military and passenger jets, most of ours go back on the aircraft after the annual inspection. 180 mph turbo charged single.
|
|
|
RK
|
| posted on 17/8/08 at 01:04 AM |
|
|
And that is why I stopped flying airplanes for a living: you are flying whatever the boss has given you!!
That said, I have done up and undone every nut on the car several times.
|
|
|
Fozzie
|
| posted on 17/8/08 at 02:08 AM |
|
|
Option 1 ........
Fozzie
'Racing is Life!...anything before or after is just waiting'....Steve McQueen
|
|
|
johnston
|
| posted on 17/8/08 at 07:12 AM |
|
|
Were nyloc nuts not designed to be re used several times?
I think it depends on the quality i.e. Type of nut your boss buys and needs to keep costs down throw it over your shoulder once off, type of nut we
buy for own use prob better quality therefore use a couple o times.
If in doubt and nothin else bit of loctite does the job.
|
|
|
David Jenkins
|
| posted on 17/8/08 at 08:19 AM |
|
|
The USA car engineering guru Carroll Smith discusses this in one of his books - he re-uses his nylocks a few times, even on his competition cars, as
long as they appear to be in good condition.
|
|
|
smart51
|
| posted on 17/8/08 at 08:42 AM |
|
|
I reuse them if I have to. If I don't have one the right size. I don't reuse them on safety critical parts or if they look knackered.
I've never had one fall off or even come loose.
|
|
|
wilkingj
|
| posted on 17/8/08 at 08:54 AM |
|
|
Option One every time.
Are you REALLY REALLY sure you want to put your life (or some other innocent persons) at stake for the price of a 10 pence nut?
If it warrants a Nyloc (or a castelated and pinned Nut, then its there for a reason, and usually its safety.
PLEASE DONT DO IT.
The cost saving factor compared to the safety factor is just not worth it.
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
|
owelly
|
| posted on 17/8/08 at 12:30 PM |
|
|
I reuse. Unless I happen to have a new one in my hand which never happens!! Sometimes give the top of the nut a bit of a squish in the vice to crush
the nylon bit if I think it needs it. I've never had anything come loose or fall off. Not of the car, bike or boat anyway!!
It's nothing to do with being a tightfisted Yorkshireman. I'm just been green and reducing my carbon footprint so I don't feel
guilty when I drive a car that spews out filthy gasses and poisons badgers.
http://www.ppcmag.co.uk
|
|
|
djmnr
|
| posted on 17/8/08 at 07:12 PM |
|
|
option 5 for me.. never had problems... yet
|
|
|
