hiya all what do u recomend to seal the Chassis with thanks Baggio


[Edited on 29/12/07 by ukbaggio]

do you mean paint wise?

I applied two coats of red oxide followed by two coats of jenolite chassis black using a 1" brush. It takes forever, but looks OK IMO and is easily touched up in the future too.

If you are going to hand paint the best tool for the job is in fact a small roller and then you only need a brush for the tricky corners. It's about 20 times faster than a brush.

I find that with a roller it bubbles and in summer dries too fast and looks LOUSY.