Hi Folks
we are having another clearout to make way for a lot of the G2 Sabre stock so heres some of the parts to clear

Steering joints - 3 of - part number RD820F rrp £18.80 plus vat £10 each

Set of 320mm black titan single adjustable shocks - were development items for G1 and cost £1800 - £400 to clear

Set of Image BPS split rims 6 x 13 et35 cost £250 per rim - £400 the set

CBR1000rr5 engine in mint condition and with 5000 miles on it (shipped in error) was up for £1400 - £800 plus carriage if not collected

Yamaha R1 4c8 engine - customer cancelled order - minus starter assembly - ideal race spare £600

Brand new Honda 919 blade genny covers - fit all of the 919 blades but not 893 were £70 plus vat new - £40 to clear (lots of these

3 paddleshift set ups minus centre tubes - these are used and will need a centre bearing fabricating but would form the backbone of a paddle system - billet paddles and centre rockers - 2 with paddles to suit around 300mm wheel, 1 set for smaller 280mm wheel - £40 each

Clearing some 919 billet sumps retail on these is £275 plus vat - got three that will go for £200 plus vat and carriage

Anyone interested just U2U me your details and I will sort things at this end or you can call me on 01449 736633

Also have 3 brand new Sabre G2s Racecars available

Will go through the other stockroom later to see what else is lurking

Regards
Andy

U2U sent regarding 280mm paddles

280mm paddles gone to 40 inches
Andy

I dont suppose you have a ZX12 billet sump lurking around do you?! I have found a lot of road rash on my shortened sump, so an upgrade might be a good idea!

I will check on the 12 sump but I dont think so - I am about to venture into the store in a it
Andy

quote:

---

Originally posted by Andy B
280mm paddles gone to 40 inches
Andy

---

OK just found 3 Striker front top rockers - cant remember why we have 3 - anyway they are used and will set you back £15 each plus carriage

Also 1 pair of ford sierra rear calipers £15 each plus carriage

Pair of GTS high back GRP seats in black bought for a car they didnt fit £80 pr plus carriage or you can collect - dont worry about them being GTS - they will get to you

Another complete paddleshift ready to install but used for 300mm £150 plus carriage

I will keep digging and see what turns up
Andy

sierra calipers please :-)
u2u me your paypal details and will pay now! cheers craig

are they for solid discs btw? do the have the slider brackets too? cheerd CNH

Do you have any used 893 billet sumps?

Hi the calipers have the slider brackets and are for single solid disc, the 893 sumps are the same as the 919 ones, I dont have a used one but have some 919/893 on special offer at the moment
Cheers
Andy

quote:
Originally posted by Andy B
280mm paddles gone to 40 inches
Andy


Wow, those paddles have grown a lot!

Hi RIE
thats inflation for you
aNDY

payment sent cheers Andy :-)

Craig

1 300mm set of paddles gone to Femster, calipers to CNHSS1
regards
Andy

hi will the seats fit in a striker ?
any pics please

regards
chaddy44

Pictures of seats now up on our facebook page at
www.facebook.com/abperformanceltd
regards
Andy

quote:

---

Originally posted by Andy B
Pictures of seats now up on our facebook page at
www.facebook.com/abperformanceltd
regards
Andy

---

quote:

---

Originally posted by Andy B
Pictures of seats now up on our facebook page at
www.facebook.com/abperformanceltd
regards
Andy

---

Seats gone to Spud1985
regards
Andy

Andy, shouldn't you be at Donington clearing snow instead of in store room clearing up ?

cancelled!

As Daniel said - but look on the bright side it means I don,t have to get freezing cold at Donnington, I can get a load of stuff done at the unit in the freezi........ I,ll get my coat!

Andy, How much for the used complete paddle unit + fitment to my car with push/pull cable? £150 + ???

PM or email me if you want to.

Thanks

Ashley


[Edited on 23/3/13 by Spud1985]

Thank god I missed this thread prior to all the dibs...


(... although I was sorely tempted by that Fulcrum body you had advertised on FB... ).

quote:

---

Originally posted by Andy B
, the 893 sumps are the same as the 919 ones, I dont have a used one but have some 919/893 on special offer at the moment
Cheers
Andy

---

Hi scootz, thought some of that might wet your appetite must admit I was eyeballing your carbon tub but had to remind myself that I wouldn't have time to build it up!
Ceebmoj With reference to the billet dumps they are 50mm deep with oil drain relocated to the side

And a big apology the image 3 piece split rims are 15 inch ford fitment not 13 inch

quote:

---

Originally posted by ceebmoj

quote:

---

Originally posted by Andy B
, the 893 sumps are the same as the 919 ones, I dont have a used one but have some 919/893 on special offer at the moment
Cheers
Andy

---

what is the difference in height to the standard sump?

---

Description

quote:

---

Originally posted by Andy B
Hi scootz, thought some of that might wet your appetite must admit I was eyeballing your carbon tub but had to remind myself that I wouldn't have time to build it up...

---

Scootz - you are a very bad man - and I have a total lack of will power so stop it!!!

I know what you mean Andy I've had my credit cards confiscated it's not fair !!!

Quick update on whats left as it all got a bit manic and a few further reductions as I want the space prior to the season -

The 320mm intrax black titan shocks - will do these for £300 the set plus carriage

Image BPS 3 piece split rims 6.5 x 15 ford 4 stud with anthracite centres will do for £375 plus carriage

Still have 2 893/919 billet sumps at £200 plus vat and carriage

CBR1000rr5 engine which is a minter - £800

R1 4c8 engine minus starter motor ass - £600

also found -

4 x Yokohama AO48r medium comp 205 50 15 - used but plenty left for trackdays £20 each plus carriage or collect
2 x Yokahama AO48r medium comp 195 50 15 - used but as above


I will try and put some more shots on our facebook page of the bits and pieces
Andy

I've sent a U2U regarding the wheels Andy, also can you let me know how much you want for the BPS wheels and all the A048 tyres as a job lot please

Andy U2U for the Striker top rockers
Cheers Rew

must resist the rr5 blade. not even collected the 919 fury blade yet

Hi Daniel - you know it makes sense,
Also quick note to let everyone know if you ordered something over the weekend its on its way to you
regards
to all
Andy

Andy, does the 1000rr come with all the electrics etc ?

Andy,

What year is the 1000 RR?

Iain L

calipers arrived safe and well thanks, great service

Hi Guys
sorry I missed your questions - bit manic here
The blade is an 05 unit and is motor only but if you wanted running gear I could sort that
I will put an update on some of the kit later as some folks changed their minds about some of the parts so we still have a few parts
Andy