Board logo

Fury Phoenix Stylus
CRAIGR - 21/4/13 at 03:32 PM

Fury/ Phoenix/ Stylus
As above wanted
Unloved ,unused, unfinished, damaged. Anything considered .
Please u2u me with what you have.

[Edited on 21/4/13 by CRAIGR]


zekill - 21/4/13 at 04:04 PM

you can't found a Fury / Phoenix / Stylus unloved


clairetoo - 21/4/13 at 04:31 PM

LINKY


CRAIGR - 23/4/13 at 06:32 PM

boing


FFTS - 28/4/13 at 10:18 AM

You may be intereste in one ofmy optins :-(

http://www.locostbuilders.co.uk/forum/35/viewthread.php?tid=181017


CRAIGR - 28/4/13 at 11:05 AM

Thanks for the offer Chris but too much for me. Looks a cracker though and good luck with the sale.


SCAR - 28/4/13 at 01:23 PM

Theres one parked on my front lawn that needs to go as I will never get round to doing it, only moved to cut the grass.
All correctly registered as a Sylva Stylus in my name with V5, on sorn for several years, non Q plate.
Engine is out and stripped, tuned crossflow, could be included or not as I have a crossflow pheonix to build. Its was a long term rebuild project that stalled and I guess I will never get round to it.
Needs a full rebuild although has some new suspension parts powder coated and fitted
Will post pictures if interested, once again it needs a complete rebuild.


SCAR - 30/4/13 at 03:08 PM

Stylus as described above
Photos taken today after I had washed it so still wet which makes it look a lot better than it is.
In my opinion it will need a full respray as I dont think the gelcoat will polish up, when dry it turns grey
Also I think some chassis rails will need replacing due to rust
Wheels would be the plain alloys as I want the red minilites, tyres are nearly new
Type 9 box included as I have others
I also want to keep the crossflow exhaust, if I were going to rebuild I would probably go for a more modern engine
Hood is shot
Door hinges shot
Rocker arms and wishbones are new
Rear trailing arms are new
Discs are new but may be shot
Uprights were newly pc but have been on for a few years.
Good points
Reg in my name as sylva stylus
Non Q plate
So whats it worth? I dont really know so some ideas would be nice (please dont say its worth what someone is willing to pay as I know that already)

[img]http:// Description
Description
[/img]

[img]http:// Description
Description
[/img]

[img]http:// Description
Description
[/img]
some more images in my photo archive

[Edited on 30/4/13 by SCAR]


CRAIGR - 7/5/13 at 07:05 PM

Still looking.
Any more around. Must be some deadens or part builts out there.


SCAR - 8/5/13 at 11:55 AM

Have posted in the for sale section


CRAIGR - 5/7/13 at 07:38 PM

boing


daniel mason - 5/7/13 at 08:59 PM

all depends on budget!
for what it is.mine is very cheap although i may have already found a buyer. just waiting for a call as we speak!


CRAIGR - 5/7/13 at 09:01 PM

Way to dear for me Dan sorry


CRAIGR - 23/7/13 at 03:08 PM

bttt
Would consider unfinished,part built,damaged unused for some time Striker also

[Edited on 23/7/13 by CRAIGR]