Well my mum and I have finally got an autotest car ('91 twin carb Civic!) and we need some sticky tyres for the front, we have a few options when
it comes to wheels. Remember, I'm on student budget!
Original steels are 13"
We have a set of 14" 'loys from a CRX
Or I could try get a set of some wider/lighter 13'"
We will prob stick to original 13" on the rear with skinny tyres as we need the back to slide around a bit. What would be the best wheel/tyre
combination on the front? I cant afford Toyo 888s or the like so was thinking about Yoko A539s as the car will get used in the wet occasionally.
Opinions gents?
Here's the pic + vid of my last run, dont laugh! This was I'm my mum's CRX and thats her laughing at the end! She wanted to be
passenger when I was driving so I didn't rag her car too hard
Video
There were several C****hams at the event which spent most of the time going backwards due to the rain. Looked like fun though!
Thanks,
Iain
[Edited on 17/5/07 by IainB]
Hi Iain
I have a set of four 185/60/14 Colway F2 cut slicks (3 are legal) which would be ideal. If you have anyone going from Sussex up your way you are
welcome to them.
- Jim (ex X1/9er)
forgot to mention that they are cr*p in the wet with my Phoenix but possibly better with a heavier car.
[Edited on 18/5/07 by jimgiblett]