I am fitting an XE into my Luego - having a bit of difficulty judging how much clearance I need for the clutch arm - has anyone got some photos
showing the clutch arm's position as it emerges from the bellhousing? - I don't think it even has to be an xe / type 9 combo to give me the
insight I need.
Thanks in advance, Steve.
Mine sticks out the side to about the same diameter as the main bit that bolts to the engine... if you get my drift
not really? - your cluch arm sticks out about the same diameter as the main bit that bolts to the engine?
?
Yep, thats it.
Anyone got a photo of their bellhousing ?
That made me laugh.
Don't ask why....
you lot get worse!
All I wanted was a simple photo.....
quote:
Originally posted by zilspeed
Anyone got a photo of their bellhousing ?
That made me laugh.
Don't ask why....
sorry, don't have a pic but can tell you that the arm on my mt75 is only about 6mm from the chassis when it'sw fully released, the rubber
cover almost touches!
hth.
john