jamesbond007ltk
|
 posted on 1/3/07 at 12:41 AM |
|
|
Rally design Rod End Accessories tube/rod
What are these?
http://www.rallydesign.co.uk/catalog/index.php?cPath=1113_1131_1136
Its late! I should be in bed!
|
|
|
|
|
Confused but excited.
|
| posted on 1/3/07 at 02:39 AM |
|
|
from the desciption I would assume it is tube with a wall thickness and bore suitable for tapping to take male threaded rod ends. So that you can make
links/trailing arms to you own requirements.
Someone will soon correct me if I am wrong.
Tell them about the bent treacle edges!
|
|
|
nitram38
|
| posted on 1/3/07 at 08:45 AM |
|
|
I would think that they are threaded tubes that can be cut for making your wishbone bushes.
|
|
|
shortie
|
| posted on 1/3/07 at 09:34 AM |
|
|
If it's threaded tube for tapping then you can get it much cheaper from here www.metalfast.co.uk
Rich.
|
|
|
jamesbond007ltk
|
| posted on 1/3/07 at 06:19 PM |
|
|
It its threaded tube why do you need to tap it? or is that dumb?
PS thanks for the website. will be very useful
quote:
Originally posted by shortie
If it's threaded tube for tapping then you can get it much cheaper from here www.metalfast.co.uk
Rich.
[Edited on 1/3/07 by jamesbond007ltk]
|
|
|
rally design
|
| posted on 2/3/07 at 09:31 AM |
|
|
Rally design Rod End Accessories tube/rod
These are 1m long tubes which are not threaded. they are to suit our threaded inserts which slot into the end to enable a rod end fitting. You can
cut the tube to the required length and then weld in the threaded insert. You can see the inserts here
http://www.rallydesign.co.uk/catalog/index.php?cPath=1113_1131_1134_1135
You will notice that the tube rods are listed with a size to suit each insert so these will need to match when ordering
http://www.rallydesign.co.uk/catalog/index.php?cPath=1113_1131_1136_1137
|
|
|
nitram38
|
| posted on 2/3/07 at 09:52 AM |
|
|
quote:
Originally posted by rally design
These are 1m long tubes which are not threaded. they are to suit our threaded inserts which slot into the end to enable a rod end fitting. You can
cut the tube to the required length and then weld in the threaded insert. You can see the inserts here
http://www.rallydesign.co.uk/catalog/index.php?cPath=1113_1131_1134_1135
You will notice that the tube rods are listed with a size to suit each insert so these will need to match when ordering
http://www.rallydesign.co.uk/catalog/index.php?cPath=1113_1131_1136_1137
Some pictures or diagrams on your website might make it easier for us to understand this!
You know what you are talking about but a picture paints a thousand..............you know what I mean! 
|
|
|
rally design
|
| posted on 2/3/07 at 10:34 AM |
|
|
Rally design Rod End Accessories tube/rod
No problem, thanks for the feedback. I will do some pictures today and they will be live on the website by mid afternoon.
Rally Design
|
|
|
