maartenromijn
|
posted on 27/1/11 at 09:42 AM |
|
|
Correct English word for this?
What would de the correct English word for this tool?
BLOG: http://thunderroad-super7.blogspot.com/
|
|
|
liam.mccaffrey
|
posted on 27/1/11 at 09:48 AM |
|
|
we call them floggers, just looked it up in the brammer catalogue and its proper name is a slogging spanner
[Edited on 27/1/11 by liam.mccaffrey]
Build Blog
Build Photo Album
|
|
tomgregory2000
|
posted on 27/1/11 at 09:51 AM |
|
|
metric ring slogging spanner
|
|
maartenromijn
|
posted on 27/1/11 at 09:51 AM |
|
|
Thanks. We don't have that kind of info in the Netherlands.
BLOG: http://thunderroad-super7.blogspot.com/
|
|
Flamez
|
posted on 27/1/11 at 10:06 AM |
|
|
I guess you smack it with a hammer, my type of tool lol.
my build mac1motorsports
|
|
daviep
|
posted on 27/1/11 at 10:36 AM |
|
|
Everywhere that I've worked they have also been called flogging spanners.
Davie
“A truly great library contains something in it to offend everyone.”
|
|
Xtreme Kermit
|
posted on 27/1/11 at 12:19 PM |
|
|
What a novel idea...
A spanner designed to be hit with a hammer
[Edited on 27/1/11 by Xtreme Kermit]
|
|
mad4x4
|
posted on 27/1/11 at 12:25 PM |
|
|
If the offshore world ( Aberdeen and the likes) these would be flogging spanners
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
James
|
posted on 27/1/11 at 12:54 PM |
|
|
Well! You learn something every day. Never heard of or even seen them before!
Cheers,
James
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|
owelly
|
posted on 27/1/11 at 12:54 PM |
|
|
I used to use these flogging spanners on a daily basis until the health and safety brigade saw them. They've been banned by the H&S for
almost everything they were intended for!!
http://www.ppcmag.co.uk
|
|
bi22le
|
posted on 27/1/11 at 01:11 PM |
|
|
Huh, never seen one of those before either.
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
liam.mccaffrey
|
posted on 27/1/11 at 01:12 PM |
|
|
Seriously? Must check that out as they are used all the time here!
quote: Originally posted by owelly
I used to use these flogging spanners on a daily basis until the health and safety brigade saw them. They've been banned by the H&S for
almost everything they were intended for!!
Build Blog
Build Photo Album
|
|
yozza
|
posted on 27/1/11 at 02:35 PM |
|
|
Hi
We use them a lot offshore as mentioned above. They are supposed to be used when tightening with a machined recess, usually with a gasket between
(valve flanges etc) the idea being you hit it until the note changes to a 'ring'. This tells you that both flanges are metal to metal and
the machined recess is compressing the spiral wound gasket correctly. Torque bars or torque multipliers are the more acceptable method but using a big
hammer with these is much more fun!!
Joe
|
|
maartenromijn
|
posted on 27/1/11 at 03:06 PM |
|
|
We use them at our ship repair yard. I needed the proper word in order to write my report in English.
BLOG: http://thunderroad-super7.blogspot.com/
|
|
Peteff
|
posted on 27/1/11 at 04:20 PM |
|
|
I've not seen one of those for a long time. They were flogging spanners here as well. Is it still Christmas there Marten? I never heard them
called slogging spanners. There's a link to some here.
[Edited on 27/1/11 by Peteff]
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
TPG
|
posted on 27/1/11 at 05:55 PM |
|
|
We used to use them to tighten the top nut on 36" (Yes-3 foot) pumps when I was an apprentice. It was the apprentices job. Stood there swinging
with a large sledge hammer untill the Fitter said "Okay". Then "You can undo it now,Don't be such a cheeky (^%*** in the
future." Couldn't lift your arms above the shoulder after doing them.
Happy days.
..Which was nice..
|
|
perksy
|
posted on 27/1/11 at 06:27 PM |
|
|
Last time i used one of those it ended in Tears
Think i've still got the scar..
|
|
Nash
|
posted on 27/1/11 at 08:00 PM |
|
|
In petro-chem industry they have copper version to hit with copper hammer intringically safe (no sparks).
Tend to be used on 1" plus only Never seen a 2BA flogging spanner
..............Neil
It's What You Do Next That Counts.
Build It, Buy It, Drive It:
Southern Kit Car Club
|
|
maartenromijn
|
posted on 28/1/11 at 01:17 PM |
|
|
quote: Originally posted by Peteff
Is it still Christmas there Marten? [Edited on 27/1/11 by Peteff]
No Christmas, but I cannot tell the ladies goodbye...
BLOG: http://thunderroad-super7.blogspot.com/
|
|
mcerd1
|
posted on 28/1/11 at 01:46 PM |
|
|
quote: Originally posted by Flamez
I guess you smack it with a hammer, my type of tool lol.
you can also stick a bit of tube over the end of it and just use it like a giant spanner (obviously it needs to be a fairly strong / close fitting
tube)
the last time I saw them using a bar ~1.5m long
I'd never seen untill a year ago when I had to start designing structures that needed M42 bolts to hold them to the ground
and aparently it hard to get 65mm spaners.....
-
|
|
gazza285
|
posted on 28/1/11 at 05:44 PM |
|
|
Use them all the time, they're in the van next to the podgers.
DO NOT PUT ON KNOB OR BOLLOCKS!
|
|
Angel Acevedo
|
posted on 1/2/11 at 05:12 PM |
|
|
Sorry,
Late to the party:
Correct name would be "Flat Flogging Spanner"
As oppossed to "offset" ones
AA
Beware of what you wish.. for it may come true....
|
|
britishtrident
|
posted on 1/2/11 at 05:28 PM |
|
|
quote: Originally posted by Angel Acevedo
Sorry,
Late to the party:
Correct name would be "Flat Flogging Spanner"
As oppossed to "offset" ones
AA
Could be yet another nick name for Max Mosley
|
|
britishtrident
|
posted on 1/2/11 at 05:30 PM |
|
|
quote: Originally posted by mcerd1
quote: Originally posted by Flamez
I guess you smack it with a hammer, my type of tool lol.
you can also stick a bit of tube over the end of it and just use it like a giant spanner (obviously it needs to be a fairly strong / close fitting
tube)
the last time I saw them using a bar ~1.5m long
I'd never seen untill a year ago when I had to start designing structures that needed M42 bolts to hold them to the ground
and aparently it hard to get 65mm spaners.....
When you get bolts that big i tends to be hydraulic bolt stretchers that are the weapon l of choice.
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
mcerd1
|
posted on 1/2/11 at 06:44 PM |
|
|
quote: Originally posted by britishtrident
quote: Originally posted by mcerd1
quote: Originally posted by Flamez
I guess you smack it with a hammer, my type of tool lol.
you can also stick a bit of tube over the end of it and just use it like a giant spanner (obviously it needs to be a fairly strong / close fitting
tube)
the last time I saw them using a bar ~1.5m long
I'd never seen untill a year ago when I had to start designing structures that needed M42 bolts to hold them to the ground
and aparently it hard to get 65mm spaners.....
When you get bolts that big i tends to be hydraulic bolt stretchers that are the weapon l of choice.
I think they were just going get a big 1" drive socket / torque wrench - they are only 8.8's not HSFG's so they don't need to
be that tight and we use locknuts just to be sure they don't work loose (well you wouldn't want 50tonnes of steel landing on your head
)
but the standard just says "tightened with appropriate spaners" and give no other guidance
-
|
|