coozer
|
posted on 16/12/08 at 11:04 PM |
|
|
Blocking Radiator Vent
I want to block the rad vent on the top of my Polo rad and use the vent on top of the zetec thermostat housing instead.
Whats the best stuff to use? There's not enough room between it and the nose cone to put a rubber pipe and blank on it.
Steve![](/images//smilies/bigsmile.gif)
1972 V8 Jago
1980 Z750
|
|
|
Pdlewis
|
posted on 16/12/08 at 11:10 PM |
|
|
I tapped it and put an m4 in it
Build Photo Album
Updated 05/02/2009
|
|
clairetoo
|
posted on 16/12/08 at 11:11 PM |
|
|
I tapped mine , and put an M6 button headed screw in with some lock'n'seal on it - no leak's so far
[Edited on 16/12/08 by clairetoo]
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
coozer
|
posted on 16/12/08 at 11:34 PM |
|
|
Good idea, is Hylomar blue OK for hot water??
1972 V8 Jago
1980 Z750
|
|
triumphdave
|
posted on 17/12/08 at 01:21 AM |
|
|
quote: Originally posted by coozer
Good idea, is Hylomar blue OK for hot water??
Yes,I have used it a few times on bleed screws with no probs.
If you always do what you have always done you will always get what you have always got
|
|
Bluemoon
|
posted on 17/12/08 at 10:00 AM |
|
|
M5 SS cap head in mine..
Dan
|
|
paulf
|
posted on 17/12/08 at 03:21 PM |
|
|
I just put a self tap in mine , it has been in there for 5 years and never leaked.
Paul.
|
|
jabbahutt
|
posted on 17/12/08 at 04:22 PM |
|
|
I fitted the original black rubber blank off a pinto thermostat housing.
It secures with a jubilee clip and doesn't leak. The rubber end cap cost about 80p.
Nigel
|
|