Glade
|
| posted on 25/9/11 at 09:26 PM |
|
|
4AGE GSXR-600 Throttle Bodies Omex Base Map
Hi All
I have a 4AGE 16v on Dellorto DHLA 45's which I'm converting to run on 2001 GSXR-600 K1 throttle bodies over the winter.
I also have a Omex 500 running electonic ignition.
Car has Raw Engineering Trac Pac 1 Cams.
Just wondering if anyone who has done the conversion has a base map they'd be kind enough to send me!
Many thanks
Tim
|
|
|
|
|
tul214
|
| posted on 25/9/11 at 10:03 PM |
|
|
Speak to the guys at OMEX. They were very helpful when I went to see them.
1.6 Raw Super6 sold
|
|
|
Glade
|
| posted on 26/9/11 at 11:44 AM |
|
|
Wow, I emailed Omex this morning and got sent a .cal file straight away!
|
|
|
tul214
|
| posted on 26/9/11 at 05:17 PM |
|
|
Said they were good!
1.6 Raw Super6 sold
|
|
|
Adey1984
|
| posted on 26/9/11 at 08:04 PM |
|
|
Top blokes down there, help me out no end
|
|
|
R1 STRIKER
|
| posted on 3/10/11 at 07:13 PM |
|
|
Not Sure if this is the map we did for my car several years ago. Spent a day with Dave at Mech Repairs in cheltenham which is the rolling road used by
omex. My Car was a Raw striker with 4age, trac pac 1 cams and a home brew 600 gsxr conversion. It made 161 bhp at the time and sounded amazing.
|
|
|
Glade
|
| posted on 3/10/11 at 07:26 PM |
|
|
quote:
Originally posted by R1 STRIKER
Not Sure if this is the map we did for my car several years ago. Spent a day with Dave at Mech Repairs in cheltenham which is the rolling road used by
omex. My Car was a Raw striker with 4age, trac pac 1 cams and a home brew 600 gsxr conversion. It made 161 bhp at the time and sounded amazing.
Don't suppose you had a copy of that 
I think this startup map will be rich - to be on the safe side...
It certainly is in comparison to the map currently on the ECU, and the jenvey TB map I've had a look at. (different injectors of course)
|
|
|
Adey1984
|
| posted on 3/10/11 at 07:36 PM |
|
|
Omex used to use mech, they have there own rollers at there new premises. A generic map/cal or map from someone else's car will be ok but to get
the best out of the car you'll need to get it mapped
[Edited on 3/10/11 by Adey1984]
|
|
|
Glade
|
| posted on 4/10/11 at 11:57 AM |
|
|
quote:
Originally posted by Adey1984
Omex used to use mech, they have there own rollers at there new premises. A generic map/cal or map from someone else's car will be ok but to get
the best out of the car you'll need to get it mapped
[Edited on 3/10/11 by Adey1984]
I've been getting quotes, which vary quite a lot! £50 - £70 per hour +vat, and 4 - 7 hours!
I need a good job doing... i guess more expensive is better....????
|
|
|
R1 STRIKER
|
| posted on 4/10/11 at 07:16 PM |
|
|
Haven't seen the guys from omex for a while as i've not had a kit car for a while, so didn't know they got their own rolling road
now. Got the bug for another striker or maybe a phoenix but we have a baby on the way so may have to wait a bit!!
I don't have a copy of that map. I'm not certain but martin at raw may have it as we did plenty of work on the car there.
|
|
|
Adey1984
|
| posted on 5/10/11 at 08:20 PM |
|
|
quote:
I've been getting quotes, which vary quite a lot! £50 - £70 per hour +vat, and 4 - 7 hours!
I need a good job doing... i guess more expensive is better....????
Not always, it's a funny business, I'd go with someone who comes recommended and knows the engines quite well
[Edited on 5/10/11 by Adey1984]
|
|
|
