tompat3463
|
| posted on 23/6/12 at 03:10 PM |
|
|
cbr900 fireblade CDI wre question ?!?
busy wiring my blade engine and I have a 919blade loom.
there is a pink wiring coming from the CDI unit and cant put my finger on what it is for..
I have some good wiaring diags but non of them show it.
thanks Alan
|
|
|
|
|
bigrich
|
| posted on 23/6/12 at 03:49 PM |
|
|
Pink wire is anti hotwire for CDI. You need to connect this to ignition live but install a 380 ohm resistor in the pink wire to lower the voltage the
CDI sees. Its to stop the bki being stolen by pulling wires out and joining them together
The resistor is part of the blade ignition.switch so not shown on the diagrams
HTH Rich
.JPG)
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
|
tompat3463
|
| posted on 23/6/12 at 04:09 PM |
|
|
ok thanks for that.. any idea what wattage resitor I would need ??
thanks Alan
|
|
|
zekill
|
| posted on 23/6/12 at 04:46 PM |
|
|
standard 1/4w resistor is ok.
Fisher Fury with Phoenix bodywork, Blade 919cc
|
|
|
