scootz
|
| posted on 16/8/12 at 07:40 PM |
|
|
Ford 7.5" Diff
Does anyone know the left / right offset for the output flanges on a Ford 7.5" diff (from the input flange centre line).
Cheers!
It's Evolution Baby!
|
|
|
|
|
ChrisLeary
|
| posted on 16/8/12 at 08:33 PM |
|
|
If I manage to get down the garage tomorrow I'll get some measurements Scootz.
ATB,
Chris
|
|
|
scootz
|
| posted on 16/8/12 at 08:40 PM |
|
|
You're a star! Cheers!
It's Evolution Baby!
|
|
|
Liam
|
| posted on 20/8/12 at 08:08 PM |
|
|
From (rusty) memory, isn't the long shaft about 40mm longer than the short one? For both 7 and 7.5" diffs if I recall. So that, if right,
would be your answer.
|
|
|
Steve Hignett
|
| posted on 20/8/12 at 08:20 PM |
|
|
quote:
Originally posted by Liam
From (rusty) memory, isn't the long shaft about 40mm longer than the short one? For both 7 and 7.5" diffs if I recall. So that, if right,
would be your answer.
If that were correct, wouldn't 20mm be the answer, rather than 40mm?
|
|
|
Liam
|
| posted on 21/8/12 at 06:39 AM |
|
|
Well if you look at it that way (i.e. read the question properly) then yes 
|
|
|
scootz
|
| posted on 21/8/12 at 07:09 AM |
|
|
It's Evolution Baby!
|
|
|
