Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Mk Indy, what ET are you running?
fullpint

posted on 21/2/13 at 07:20 PM Reply With Quote
Mk Indy, what ET are you running?

Ok its asked many times. Ive done the search and also looked n willitfit.com
So my Mk Indy blade is on 15 x 6.5 et37. I really want to go down to 13's but having trouble finding a set with the exact ET.
So is anyone running 13 x 7's with an et of 24mm?
According to my workings the out board flange will be about 20mm further out and about 7mm further out on the in-board flange.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Kev99

posted on 21/2/13 at 07:55 PM Reply With Quote
Im running pro race 1.2s 13" et35
View User's Profile E-Mail User View All Posts By User U2U Member
whitestu

posted on 21/2/13 at 08:47 PM Reply With Quote
Mine are also pro race 1.2s and either 35 or 38 et

Stu

View User's Profile View All Posts By User U2U Member
40inches

posted on 21/2/13 at 08:52 PM Reply With Quote
Mine are 35 too.






View User's Profile View All Posts By User U2U Member
Barkalarr
Contributor






Posts 942
Registered 14/3/12
Location Essex
Member Is Offline

Photo Archive Go!
Building: Caterham R300, Caterham Roadsport,Indy R1,Indy Zet

posted on 21/2/13 at 11:00 PM Reply With Quote
I can get pro race wheels for a reasonable price if you're interested.
Send me a u2u

View User's Profile View All Posts By User U2U Member
Twin40

posted on 22/2/13 at 07:49 AM Reply With Quote
Hi there, I'm running 13" compomotives which are et20 all round (i think!)
View User's Profile View All Posts By User U2U Member
renetom

posted on 22/2/13 at 10:03 AM Reply With Quote
Hi
We are running 13" compomotives 35 et
Good luck

View User's Profile E-Mail User View All Posts By User U2U Member
PAUL FISHER

posted on 22/2/13 at 12:01 PM Reply With Quote
With the standard indy rear arches 7" et 24 will not fit, you require et 35.
Mk do extra wide arches, then you can fit et 24 no problem, you can even go up to a 8" rim.

View User's Profile E-Mail User View All Posts By User U2U Member
fullpint

posted on 22/2/13 at 03:09 PM Reply With Quote
Ok I will continue my hunt for 13's with the correct ET. Cheers chaps, much appreciated.
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
parkiboy

posted on 1/3/13 at 08:07 AM Reply With Quote
It's quite difficult I think? I wanted some monilites but most of them are et -7 :-( finding it rather hard to find some
View User's Profile View All Posts By User U2U Member
jps

posted on 1/3/13 at 09:00 AM Reply With Quote
...how come so many people run 13" wheels, when it looks like the minimum I can get away with on my Haynes Roadster will be 15" (in order to clear the rear wishbones). I thought the Haynes and the Indy were similar designs. Does the Haynes have an unusually broad rear wishbone setup?
View User's Profile Visit User's Homepage View All Posts By User U2U Member
whitestu

posted on 1/3/13 at 09:05 AM Reply With Quote
quote:

...how come so many people run 13" wheels, when it looks like the minimum I can get away with on my Haynes Roadster will be 15" (in order to clear the rear wishbones). I thought the Haynes and the Indy were similar designs. Does the Haynes have an unusually broad rear wishbone setup?



People run 13s beacuse unsprung weight is lower. Personally I think that size looks better as well.

If the Haynes uses Sierra components then I would have thought 13s were possible. I guess it depends on the rear upright. The front should be the same if the Sierra upright is used.

Stu

View User's Profile View All Posts By User U2U Member
parkiboy

posted on 10/3/13 at 10:45 AM Reply With Quote
While on the subject of 13" wheels, before I consider purchasing any, my car ha the willwood brake upgrade on the fronts, will 13's fit over them?
View User's Profile View All Posts By User U2U Member
rdodger

posted on 10/3/13 at 07:08 PM Reply With Quote
I have Prorace 1.2 13" ET35 over 260mm Wilwood Midilite. Sierra uprights.
View User's Profile View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.