craig_thomas
|
posted on 8/7/19 at 05:17 PM |
|
|
Identifying 2.0 Duratec
Hi
Can someone tell me where I can find the engine code on a 2.0 Duratec please.
https://www.dropbox.com/sc/jpbrlzkq9z0n24a/AADJqF7KbolXtAu5NPlLjFlqa
|
|
|
obfripper
|
posted on 8/7/19 at 06:36 PM |
|
|
That's a crate ford power products duratec, there should be an engine code on the sticker on the rocker cover, likely DHE420.
It could have come from a caterham, morgan, westfield, or other small volume manufacturer.
The codes are unique to ford power products, and don't directly relate to factory fitted engine codes.
It would originally be supplied like this:
https://www.burtonpower.com/ford-built-2-0-duratec-he-i4-std-crate-engine-new-fd2000.html
Dave
|
|
big-vee-twin
|
posted on 8/7/19 at 06:51 PM |
|
|
On the bell housing flange stamped in.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
craig_thomas
|
posted on 8/7/19 at 06:53 PM |
|
|
Thanks Dave
It is out of a factory built westy.
Do you think it’s a i4 Engine then?
quote: Originally posted by obfripper
That's a crate ford power products duratec, there should be an engine code on the sticker on the rocker cover, likely DHE420.
It could have come from a caterham, morgan, westfield, or other small volume manufacturer.
The codes are unique to ford power products, and don't directly relate to factory fitted engine codes.
It would originally be supplied like this:
https://www.burtonpower.com/ford-built-2-0-duratec-he-i4-std-crate-engine-new-fd2000.html
Dave
|
|
craig_thomas
|
posted on 8/7/19 at 06:55 PM |
|
|
https://www.dropbox.com/s/ddnkuj51b4q5lur/Photo%2008-07-2019%2C%2019%2054%2022.jpg?dl=0
quote: Originally posted by big-vee-twin
On the bell housing flange stamped in.
|
|
obfripper
|
posted on 8/7/19 at 07:57 PM |
|
|
It looks to be the same engine as the burton's link (no cam phase sensor, ford commission plate), there's nothing to say what is done to
the engine tuning wise, however 200bhp is do able with the right taper thottle bodies, exhaust and no other mods.
Dave
quote: Originally posted by craig_thomas
Thanks Dave
It is out of a factory built westy.
Do you think it’s a i4 Engine then?
|
|
big-vee-twin
|
posted on 8/7/19 at 08:31 PM |
|
|
It's not on the mating surface there is a flat with numbers stamped on you can still see it with box fitted.
quote: Originally posted by craig_thomas
https://www.dropbox.com/s/ddnkuj51b4q5lur/Photo%2008-07-2019%2C%2019%2054%2022.jpg?dl=0
quote: Originally posted by big-vee-twin
On the bell housing flange stamped in.
[Edited on 8/7/19 by big-vee-twin]
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|