adampage
|
posted on 19/10/20 at 01:30 PM |
|
|
Mazda RX8 231 6spd box
Hi, another part of my aborted project for sale - an immaculate RX8 box.
It's the 6 speed, which fits most engines pretty easily with an adapter available from a couple of suppliers, it's very similar to a type
9 in length and output etc, but it's a bit fatter, so check it fits in the tunnel.
It's in very clean condition, rotates smoothly, changes very neatly and tightly, I've had it for a while now planning to put it in a
project, but I then bought a combined eng & box so it's not needed. Comes with shifter in good condition.
Happy to send some photos if you u2u.
Prices seem to vary widely from £150-280 from a scan of ebay, and I think this is a good clean one, so I'd say £175. GIven the weight I assume
collection is easier, or delivery's likely to be another £50 ish I guess?
I'm in Stone, Staffs, might be out & about a bit over half term, or I could leave it with family in Willenhall near Walsall if easier.
Thanks
Ad
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
adampage
|
posted on 2/11/20 at 09:28 AM |
|
|
Forgot to add one detail
Hi all,
I'll try this one on ebay or elsewhere I think as it's not a usual Locost fit, but I forgot to add that I have the little adapter needed
to move the slave cylinder to make more clearance which is often used when fitting this box to other engines, and some instructions on little mods to
the oil seal at the back etc, to help anyone with the conversion/fitting.
Thanks
Ad
|
|
sam919
|
posted on 5/11/20 at 06:50 PM |
|
|
Hi, if you can arrange a courier I’ll take it please.
sarrenberg@hotmail.com if you want further correspondence
Regards
|
|
adampage
|
posted on 5/11/20 at 06:56 PM |
|
|
Happy to!
Hi Sam
No problem, I’ll get a quote and package it up, I’ll email with details.
Thanks
Ad
|
|
sam919
|
posted on 5/11/20 at 07:01 PM |
|
|
Ok great, I’ll pass on address details etc when I get your email 👍
|
|