Board logo

Thick flange plate or spare zetec head
RichardK - 22/12/10 at 08:31 PM

Could do with borrowing either a thick piece of plate which was probably used to bolt down the flange when welding up an exhaust or spare zetec head.

I need to bend the exhaust manifold I have about an inch and need something to hold the flange down whilst I warm it up and give it some.

Or has somebody got a spare scrap engine that I can fetch my propane bottle and torch and do it at you place if you're localish? Will bring beer

If anybody could help in anyway with the above that would be really great.

Cheers

Rich

whitestu - 23/12/10 at 08:52 AM

I've got a spare head, but probably a bit far away!

Stu

norm007 - 23/12/10 at 10:34 AM

quote:
Originally posted by RichardK
Could do with borrowing either a thick piece of plate which was probably used to bolt down the flange when welding up an exhaust or spare zetec head.

I need to bend the exhaust manifold I have about an inch and need something to hold the flange down whilst I warm it up and give it some.

Or has somebody got a spare scrap engine that I can fetch my propane bottle and torch and do it at you place if you're localish? Will bring beer

If anybody could help in anyway with the above that would be really great.

Cheers

Rich




I have a spare 1.8 silver top sat on garage floor.

You are more than welcome to come and use it.

RichardK - 23/12/10 at 01:40 PM

Norm, you're a star, I'll send you a u2u.

Cheers

Rich

norm007 - 25/12/10 at 07:21 AM

Hi Rich.

U2U replied to!!!!!!!!!!!!!!!!!!!!!!!!