A pair of cycle wings, vacuum bagged, waiting for trimming and clearcoating. Weight for a typical fiberglass wing is about 520-550 grams, weight of
this carbon wing is 360 grams untrimmed (!!!). Yet, it's striffer than the equivalent GRP wing!
Anyone intererested for a pair, please reply here or send me a pm. Prices lower than you might think!
[Edited on 26/4/09 by Echidna]
Rescued attachment DSC00583.jpg
What's the overall length of the wing?
Phil
What do you mean "clearcoating"?
overall length = 755mm = 29.72in
quote:
Originally posted by Steve Hignett
What do you mean "clearcoating"?
So you laquer it ?
quote:
Originally posted by fesycresy
So you laquer it ?
This wing is 204mm wide. It can accomodate a tyre with 195mm maximum width.
Soon to follow will be a 220mm version and a CSR style wing! Rear wings, narrow and wide, soon too!
[Edited on 26/4/09 by Echidna]
How much? Are they rimmed off before posting and, how much for a pair of CSR ??
quote:
Originally posted by coozer
How much? Are they rimmed off before posting and, how much for a pair of CSR ??
1) Narrow wing (overall width 204mm, overall length 755mm) : 130 GBP
2) Wide wing (overall width 220mm, overall length 755mm) : 140 GBP
3) CSR style narrow (204mm) : 160 GBP
All prices are for a PAIR of wings
You will find similar products elsewhere for more than 30% more and i always use carbon and only carbon for my wings. Please note that there
are people out there making "carbon" wings and they use 2 outer layers of carbon fiber and 1 layer of cheap fiberglass inside where it
cannot be seen. You can see this only when it has been broken.
Shipping costs are 15GBP for any type of wings. Prices will be lower for a larger order / group buy.
[Edited on 26/4/09 by Echidna]
It would be very good for me to tell me what you think of the prices! Thanks!
Hi! you have U2U
I´m really interested. I just need to do some measuring (using MK´s now)
Is it the same shipping to Sweden?
I´ll see if there is some more people here that are interested to
quote:
Originally posted by Dave Bailey
Hi! you have U2U
quote:
Originally posted by Jonte
I´m really interested. I just need to do some measuring (using MK´s now)
Is it the same shipping to Sweden?
I´ll see if there is some more people here that are interested to
Just inform me if there is any more interest for those wings. Thanks!