Hi,
Anyone in or around Surrey able to help please??

I need to find someone running the Team Dynamics pro race 1.2 alloys in a 13.
Am looking to buy some but want to check clearance of my Wilwood calipers etc.

I currently have to use 8mm spacing to clear it but i want to get some wheels that wont need them as it has effect the steering geometry in a way i dont like.
please, if you are able to let me know.
many thanks in advance
goaty

Im sure MAC1 use the Pro Race 1.2 in 13" with willwoods.

Give them a call and they will be able to help you.

depending on car and rear brake set up, you may want to check the rear callipers clear also

I'm running front wilwoods and sierra rears - the sierra rear disc set up is a larger diameter than the fronts and I have the same queris regarding running 13" wheels.

I was at a trackday yesterday (very soggy it was too!) and there was a Mac#1 there running the 13" Pro Race wheels with sierra rear disc setup - didn't ask if any mods were needed though.

I think Compomotive CXR's are an option too.

i run them on mine with wilwoods front and rear. sierra rear calipers also fit but need a small tweak to the handbrake return spring.

Give Mark at mac#1 a call.

thanks for the replys,
I am running Midilites 240mm on the front so may be wider if you are using powerlites.
As for the rear i am using sierra calipers with 220mm discs.
Dont think rear should be an issue as its fine with current wheels, it was sticking the wilwoods on that threw things out a little.

Anyone know what uprights MNR's run??
I have cortina ones so need to work out offset for these.
cheers again