Board logo

wheel fitments
aka Keith - 22/6/09 at 10:12 AM

Is vauxhaul 4 stud fitment the same as ford 4 stud?

Will a set of vauxhaul fitting alloys fit onto a ford hub?

philw - 22/6/09 at 10:14 AM

quote:
Originally posted by aka Keith
Is vauxhaul 4 stud fitment the same as ford 4 stud?

Will a set of vauxhaul fitting alloys fit onto a ford hub?



No, Ford are 108pcd and VX are 100PCD.

aka Keith - 22/6/09 at 10:18 AM

nuts, thanks Phil.
cheers
Craig

philw - 22/6/09 at 10:27 AM

quote:
Originally posted by aka Keith
nuts, thanks Phil.
cheers
Craig


Yeah, they maybe the same

m8kwr - 22/6/09 at 10:30 AM

I believe Peugeot has the same pcd, but depending on the offset you may need a spacer... as most are 15 instead of fords 35

Steve G - 22/6/09 at 10:49 AM

There's a guide here that should give you pretty much any alloy fitment. As said the PCD's are different, but the offset is also important to steering geometry and clearances

linky

mcerd1 - 22/6/09 at 11:29 AM

quote:
Originally posted by m8kwr
I believe Peugeot has the same pcd, but depending on the offset you may need a spacer... as most are 15 instead of fords 35


also the centre bore is bigger on the pug's (65.1 instead of 63.4) but you can get adapter rings

aka Keith - 22/6/09 at 11:35 AM

thanks SteveG, that site is bookmarked.
cheers
Craig

Marcus - 24/6/09 at 11:39 AM

Just a quickie, you can't space an ET 15 wheel to ET 35, it's the wrong way. You can do it the other way though.