What rubber do i need to go between the bottom screen to the scuttle?

the top one is quite good for this

linky

Does the screen have a channel at the bottom? If so you need T trim for it - this is on the woolies site:

Description:

T' Section. Usually to seal between bottom of screen and scuttle. Overall length 35mm (1 7/16". Head of 'T' is 8mm (5/16".

Also try Seals + Direct Ltd

Measure the T slot in the screen first (if you have one)... The stuff I got was an utter pain to get in to the slot could have done with a smaller one, it took all day with two of use pulling the sod though (even with washing up liquid)!

Dan

[Edited on 18/8/09 by Bluemoon]

quote:

---

Originally posted by philhoward
Also try Seals + Direct Ltd

---

Theres no channel on the bottom. The one whippy says is perfect. Cheers lads.

Actuall no whippys is to small, that goes onto 6mm, The channel is about 15. But thats the style i want.