Board logo

Xmas offer
Triton - 22/11/09 at 07:41 PM

Dear kit car fans,


Between 23/11/09 and 21/12/09 we will be having a pre-Christmas special offer


Buy any pair of triton seats & get 10% off!

Wide pair was £250 now £225

Low side pair was £220 now £198

High side pair was £220 now £198

Low back pair was £210 now £189

All prices include standard UK delivery


Email us on: emmatrs@live.co.uk or contact us on: 07824392667


Have a very merry Christmas from
Ed and Emma
TritonRaceSeats

tritonseats - 22/11/09 at 09:12 PM

cheers for posting that up

scutter - 22/11/09 at 10:49 PM

Ok, I know about the change over, but it does look like your talking to yourself

ATB Dan.

cd.thomson - 23/11/09 at 08:37 AM

Hey triton/tritonseats,

For the "wide seats" which dimension is going to be restrictive in my Dax? Where is the full width measured? Trying to work out if I can fit them in.

Full Width - 435mm
Base Width - 370mm

Chest Width- 355mm

Fozzie - 23/11/09 at 09:18 AM

Craig,

I have a 'book' chassis.....and I have got the 'wides' .... (assuming these are the same as Tritons old 'wide-boys' seat design).....pics in my archive...

HTH Fozzie

Triton - 23/11/09 at 10:23 AM

Sorry didn't realise they had registered on here
Max width is the front rolled edge and like Fozzie mentioned they fit the Locost chassis. The wide seats won't fit the early Westfield or Caterham though.

Oh and there is a Striker seat don't forget...

Triton - 23/11/09 at 10:25 AM

quote:
Originally posted by cd.thomson
Hey triton/tritonseats,

For the "wide seats" which dimension is going to be restrictive in my Dax? Where is the full width measured? Trying to work out if I can fit them in.

Full Width - 435mm
Base Width - 370mm

Chest Width- 355mm


The max width is the rolled edge which if need be could be trimmed back with a grinder, I know folk have fitted the narrower seats into the Dax but for the life of me can't remember if anyone has used the wide seats..

tritonseats - 23/11/09 at 09:00 PM

[img]http://i946.photobucket.com/albums/ad305/discusbike/DSCF1306.jpg?t=1259009879[/img]

[Edited on 23/11/09 by tritonseats]

40inches - 24/11/09 at 01:57 PM

quote:
Originally posted by tritonseats
[img]http://i946.photobucket.com/albums/ad305/discusbike/DSCF1306.jpg?t=1259009879[/img]

[Edited on 23/11/09 by tritonseats]

Someone has attacked your seat padding with a Stanley knife

alistairolsen - 24/11/09 at 02:13 PM

Do all of the above seats include bosses for runners?

Can you tell me the weight of a completed high side pair?

Cheers

Triton - 24/11/09 at 05:10 PM

quote:
Originally posted by alistairolsen
Do all of the above seats include bosses for runners?

Can you tell me the weight of a completed high side pair?

Cheers


Yes all apart from the wizard seat have m8 steel inserts bonded into the second skin and a pair of high sides will weigh approx 9kgs. Not sure on the weight of a pair of seat runners though.

alistairolsen - 24/11/09 at 10:02 PM

Thats ok, I have the runners. 4.5kg a seat isnt bad. Is there much to be saved with the low sided seats?

tritonseats - 25/11/09 at 07:24 PM

No they weigh the same in fact we have found the high side commonly weighs a bit less. The last one went out at 4kg

tritonseats - 7/12/09 at 02:17 PM

Hi Guys!

Good news Our new site is up and running. Its early days & needs a lot of work, but, check it out & let us know what you think!

www.tritonraceseats.com

Cheers,
Ed & Emma