Can anyone give a guide price for aluminium sheet 1.2mm. So I know who is pulling my chain when I phone round for some prices.
What grade am I looking for for internal panelling?

this is one of the cheapest i have found most want a lot to post so your better if you can pick up

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=270317743281&ssPageName=STRK:MEWAX:IT

[Edited on 23/8/10 by doddy]

i have a sheet 49" X 49" of 1.5mm,£20 if ya want,near heathrow airport tho
u2u me if ya want it

I paid £45 per 8x4 sheet for 1.2mm locally about 4 months ago.

Rich

I paid £65 for a 6 x 4' sheet of 1.2mm NS4.....

NS4 is the one to use btw

I have a sheet of 2mm at 2m x 4m lying around... it was going to form the one-piece flat-floor for the Ultima, but is now surplus to requirements!

I'm happy to take cuts off of it if anyone needs any!

As said, use NS4 which is a very tough alloy. 1.2mm for floor and bulkheads etc. Price range would be £45 to £50 plus VAT for an 8 x 4 or metric equivalent sheet. Where any forming is needed such as, for example, the scuttle or bonnet, pure aluminium 1050A, or NS3 are good to work with.

quote:

---

Originally posted by theconrodkid
i have a sheet 49" X 49" of 1.5mm,£20 if ya want,near heathrow airport tho
u2u me if ya want it

---

You tried Aalco?

I found them quite reasonable, and have brought steel, ali sheet and aluminium moulding.