Board logo

22mm dust cover?
MakeEverything - 8/9/10 at 09:10 PM

Hi all,

I need a 22mm rubber dust cover for a connector in the engine bay. Does anyone have any ideas please?

RichardK - 8/9/10 at 09:13 PM

amalgamating tape? Think that's hows it spelt anyway!

Would the connector need to come apart again? If so maybe not the way to go...

Will have a think

MakeEverything - 8/9/10 at 09:16 PM

Its to cover a plug. sorry, i call it a connector!

Yes it needs to be used frequently.

Davegtst - 8/9/10 at 09:24 PM

MakeEverything - 8/9/10 at 09:33 PM

quote:
Originally posted by Davegtst


Youve got a 22mm cock then Dave?

Davegtst - 8/9/10 at 09:48 PM



Ok right back on topic, anyone got a rubber for this chap?

[Edited on 8/9/10 by Davegtst]

MakeEverything - 8/9/10 at 09:56 PM

LMAO

bmseven - 9/9/10 at 05:01 AM

If it is 22mm Dia how about trying a speedwell stop end


I said stop end not bell end

bob tatt - 9/9/10 at 07:26 AM

quote:
Originally posted by bmseven
If it is 22mm Dia how about trying a speedwell stop end


I said stop end not bell end


i wouldnt put that on the end of my baby maker them grab rings will smart on the way off..

britishtrident - 9/9/10 at 07:39 AM

I have some Mk1 Escort track rod end dust boots.

dhutch - 9/9/10 at 02:05 PM

quote:

i wouldnt put that on the end of my baby maker them grab rings will smart on the way off..


Mix - 9/9/10 at 03:50 PM

Hi

We use plenty of diverse blanking solutions - a piccy of what you're trying to blank would be helpful.

Regards Mick