Board logo

MT 75 Gearbox + Vibration damper
axle - 8/3/11 at 02:59 PM

Hi all
Can anybody tell me if it is really necessary to have the vibration damper (on the MT 75 box) fitted after shortening the prop, I do not think Westfields do have it?

Best regards Axle

Chippy - 8/3/11 at 03:16 PM

I assume that your talking about the rubber donut, in which case no you don't need it. I have an MT75 box on my V6 and no donut fitted. HTH Ray

big_wasa - 8/3/11 at 06:17 PM

Depends on prop. If you have a Uj then no but there are some ie westfield that used the donut.

JAMSTER - 8/3/11 at 06:18 PM

i have a westfield mt75 and that has one

axle - 9/3/11 at 07:21 AM

Hi
I am talking about the wheel in the back of the dount. The rubber dount is part of the assembly and does need to be there! I do not have a UJ either.

Thanks

big_wasa - 10/3/11 at 09:08 PM

No you dont need it.

axle - 11/3/11 at 07:17 AM

Thanks mate, it is alway a relief when you get the answer from another enthusiast!

[Edited on 11/3/11 by axle]

[Edited on 11/3/11 by axle]