Board logo

yellow stripes on my BRG car.
daniel mason - 12/3/11 at 10:10 PM

am wanting some yellow stripes on the mnr and was thinking of a 100mm stripe right down the middle,with a 25mm gap either side, then a 25 mm stripe each side. any other suggestions for this car?



[Edited on 12/3/11 by daniel mason]


MakeEverything - 12/3/11 at 10:15 PM

I reckon a 50mm stripe 50mm left of centre, 10mm gap left then a 10mm stripe.


daniel mason - 12/3/11 at 11:00 PM

interesting richard. do you have a pic of any cars with this colour sceme?


LBMEFM - 13/3/11 at 07:20 AM

Richards idea sounds good.


MakeEverything - 13/3/11 at 09:20 AM

Not quite your colours, but you get the idea.


Steve Hignett - 13/3/11 at 09:58 AM

The 50 10 10 would be way too small...

I "think" I went 100 50 50...



Steve Hignett - 13/3/11 at 10:08 AM

Then I wrapped my carbon bonnet and boot lid in vinyl and changed the stripe to a 10 10 100 10 10





daniel mason - 13/3/11 at 10:24 AM

i like that steve. will hopefully get the tunnel cover collected tomorrow. so should be with you tuesday