Board logo

T profile rubber
rallyingden - 30/3/11 at 08:20 PM

Following on from my post ...........

http://www.locostbuilders.co.uk/forum/4/viewthread.php?tid=152825

I am looking for some T profile rubber strip 8mm wide across top of T and 30mm tall, more if possible. The short piece I have I got given and dont know where its from The long section of the T is 4mm thick at the top and 2mm thick at the bottom

Any ideas where I can get it CBS dont have it.

RD

Edit to say I could use P profile if sizes are correct

[Edited on 30/3/11 by rallyingden]

[Edited on 30/3/11 by rallyingden]


Davg - 30/3/11 at 08:38 PM

http://www.woolies-trim.co.uk/p-1783-rubber-extrusion.aspx



any good?


rallyingden - 30/3/11 at 08:42 PM

^^^^^^^^

Almost but thanks for the steer as they also have

http://www.woolies-trim.co.uk/p-1773-rubber-extrusion.aspx

Which will do

Thanks

RD

[Edited on 30/3/11 by rallyingden]