Hi all ! Just wondering if anybody can let me know where i can find some pictures of exhaust mountings ? The manifold goes over the top of the chassis rail. Cheers !

I have bolted a strip of 4mm flat bar across the bottom of my chassis - half the width it sticks out beyond the side by about 150mm on top of this is mounted a rubber bobbin which the silencer bolts too.

Originally just had it bolted to outer bottom chassis rail but it wasn't strong enough.

I am just outside York on the 1079.

quote:

---

Originally posted by big-vee-twin
I have bolted a strip of 4mm flat bar across the bottom of my chassis - half the width it sticks out beyond the side by about 150mm on top of this is mounted a rubber bobbin which the silencer bolts too.

Originally just had it bolted to outer bottom chassis rail but it wasn't strong enough.

I am just outside York on the 1079.

---

Yep the exhaust is supported by the manifold bolts.

quote:

---

Originally posted by big-vee-twin
I have bolted a strip of 4mm flat bar across the bottom of my chassis - half the width it sticks out beyond the side by about 150mm on top of this is mounted a rubber bobbin which the silencer bolts too.

Originally just had it bolted to outer bottom chassis rail but it wasn't strong enough.

I am just outside York on the 1079.

---

That was not to come up on here twice ! Thanks for the advice big- vee - twin !

Dash / wind deflector

You can just see mine, it bolts under the floor and comes up the side 25mm then outwards for a bobbing in the 25mm i have a bolt in the side of the chassis using a rivnut
Jacko

Did mine similar to big-vee-twin:


Description


Description

HTH

Thanks for the pictures ! And from what i can see the exhaust manifold is attached to the engine and the rest of the exhaust is supported by a bracket near the silencer .is that correct or have i missed something ?