Hi
Anybody no of a good company that does fiber glass work/ Repairs & full resprays on Gelcoat
Have had one price so far was silly money just for the wheel arch work :roll:
Area Oxford/Wiltshire. But if there good will be able to travel on a trailer
Two main places to try for this;
a) your local friendly chandlery/marina, who should be able to recommend someone, or
b) a commercial vehicle repair centre.
If done properly, you shouldn't have to repaint - a good repairman (or woman, I'm not sexist!) should be able to match the gelcoat colour,
assuming it's a standard RAL / Pantone / British Standard colour, or a manufacturer specific eg. Ford glacier white, Mercedes arctic white etc..
Only if it's a large repair area should they suggest painting to try and blend it in.
There's a couple of questions you should also ask whoever you speak to - basically, most panels are made with polyester resin and glass mat,
often with a tissue surface, and gelcoat finish. "New" polyester resin doesn't take as well to "old" polyester resin, so my
suggestion would be to ask them for an epoxy-based repair. Any materials man worth their money will know what you mean.
If you want any extra information, then please feel free to drop me a U2U. Just sorry I couldn't recommend anyone specific!
You might try Steve at C12 Composites (Chippenham in Wiltshire) or Westgate Composites near Newbury for the GRP repair.
I can also recommend Andy Westgate and Steve at C12
quote:
Originally posted by Charlie_Zetec
Two main places to try for this;
a) your local friendly chandlery/marina, who should be able to recommend someone, or
b) a commercial vehicle repair centre.
If done properly, you shouldn't have to repaint - a good repairman (or woman, I'm not sexist!) should be able to match the gelcoat colour, assuming it's a standard RAL / Pantone / British Standard colour, or a manufacturer specific eg. Ford glacier white, Mercedes arctic white etc.. Only if it's a large repair area should they suggest painting to try and blend it in.
There's a couple of questions you should also ask whoever you speak to - basically, most panels are made with polyester resin and glass mat, often with a tissue surface, and gelcoat finish. "New" polyester resin doesn't take as well to "old" polyester resin, so my suggestion would be to ask them for an epoxy-based repair. Any materials man worth their money will know what you mean.
If you want any extra information, then please feel free to drop me a U2U. Just sorry I couldn't recommend anyone specific!
quote:
Originally posted by Sam_68
You might try Steve at C12 Composites (Chippenham in Wiltshire) or Westgate Composites near Newbury for the GRP repair.
quote:
Originally posted by Camber Dave
I can also recommend Andy Westgate and Steve at C12