"7" grill
Humbug - 10/4/05 at 09:43 PM
Just finished fitting my grill to the nose cone and am quite pleased with the results.
The basic grill is from Lolocost (£7 at Detling)
The 7 and surround are made by bending 2 old coat hangers with hands and pliers to a match a blown up picture of a C****ham nose, wired and Araldited
to the main grill.
The whole lot was spray primered, sprayed with aluminium paint and the blue bits picked out in some blue I happened to have lying around.
Drilled some holes in the grill opening and fixed with washers and the insides of electrical connectors (cut the plastic off)
Rescued attachment 2005-04-06 1 Locost - grill & 7 parts.JPG
Humbug - 10/4/05 at 09:45 PM
Grill fitted
Rescued attachment 2005-04-10 7 Locost - grill fitted.JPG
Humbug - 10/4/05 at 09:45 PM
Fixing at rear
Rescued attachment 2005-04-10 9 Locost - grill fixing close-up.JPG
Hellfire - 10/4/05 at 10:28 PM
Very ingenious - watch out for the copyright holders though 
scoobyis2cool - 11/4/05 at 12:01 AM
That looks really good, I'm particularly impressed with the 7. How have you joined the loose ends of wire together?
Pete
Humbug - 11/4/05 at 05:43 AM
1. The 7 is because the grill cost £7 
2. First of all I soldered the ends together but that split so I Araldited them
