Am I right in saying Peugoet/Citroen wheels are the same PCD as Ford? If so what else do I need apart from spacers, to fit them to my car?

Thanks.

Yes, they're the same PCD (108mm).
The spigot rings (centre holes) are a little bigger than Ford, but you can get inserts made.
I didn't bother, trusting the studs to carry the weight of a light car.
The offset is something to look at.
If you're replacing Escort wheels, you're ok (et15 - 18), Sierra ones are a different story (et38)

Marcus

You may also find it hard to get the correct wheel nuts with the Peugoet taper.

Dunno about wheel nuts, mine had standard 60° taper.

Marcus

I'm using flat face sleeve nuts and drilling the wheel holes out slightly to 5/8"