Board logo

I need help sourcing parts?!
bigbravedave - 31/10/07 at 01:02 PM

Im struggling to find a source for a few bits:

a tank filler neck restrictor,
m6 wellnuts or rubber nuts, they're £1 each+ on ebay but there must be a better source.
cortina wheel bearing caps, as the bearing kits didn't come with dust caps!
some minilite centres,
and a supplier of good quality hearing bone trim and inch wide sticky back foam

If anyone can help it would be much appreciated, thanks


jabbahutt - 31/10/07 at 01:10 PM

Woolies for the herringbone trim and inch wide self adhesive foam
Try ford for the hub dust caps as that's where I got mine for the Sierra so worth a try

hope that helps


RazMan - 31/10/07 at 01:12 PM

1. Use a large washer as a last resort - it works
2. Halfrauds sell motorbike fairing screw kits - any good?
3. Ford dealer have them in stock - cheap too
4. Dunno
5. Woolies

[Edited on 31-10-07 by RazMan]


andrew.boyle - 31/10/07 at 01:53 PM

i would say try speedshack for the wheel centres m8 u never know


robinj66 - 31/10/07 at 05:23 PM

You have U2U

I would try Midland Wheels for the minilite wheel centres - they always seem to have a boxful at shows