The carbs are DHLA 40s and have the 5 progression holes the were from my 2.0l pinto and now to be fitted to a 2.0l silvertop zetec, they are fitted with:-
32mm Chokes
150 Main
7772.10 Emulsion tubes
58 Idle(we think)
7481.3 Butterfly

How would the car run on these?
What would need changing?

For a short while I ran a 1.8 zetec on solex 40 addhe's.

I had 34mm chokes, 160 mains, cant remember the rest, but it ran much better on 38mm bike carbs.

The 1.8 Zetec I think is about on the limit of what 40's can do, I think you'll struggle at the top end on a 2.0L.