Hi
Can anyone tell me where i can find a propshaft that will connect my 4 speed crossflow box to my sierra rear diff
what length do you need ?
Any size as long as the gear stick lands in a suitable position. I'm planning to fit my sierra diff, connect the prop to it and use the length of the prop shaft to determine the location of the gearbox and engine?
Not a particularly good idea M8. The Sierra prop is way too long. The gearlever will be in the engine compartment!! (if it's a book ish chassis). Better to mount engine and box where you want and get a prop made up. You may still need a gearlever extension made up to get it in the right place.
If youare intending to do any long drives in the car, fitting a Type 9 five speed would be worth consideration.
David
i had thought about a type 9. Was hoping that mabe some body would make a prop shaft that would br suitable that i could buy off the shelf.
I am using a 1300 crossflow, if i was to use a type 9 would i get a reasonable amout of power from this setup?
i've got 2. one is 10cm long, the other 3m long. any good? lol
nah, really don't build your car around the length of prop shaft you can find. most standard ford props will be far too long!
you will find someone on here, at some point, who happens to be selling one a decent length for your set up, but i'd recommend building your car,
and placing the engine, and diff, and getting a type 9 for road use (it won't give you more power, but a more barable engine speed on motorway
cruising) and approaching one of the prop manufacturers like Dunning and Fairbank, or Bailey Morris (i can't remember which i used unfortunately,
but they were were good! i think it was D&F... i had it made to my specificacton within a week from order to delivery i think. was about £120 inc
vat and delivery with brand new UJ bearings, and yokes? even specified the tube diameter i wanted.
do it that way!
here's mine
mines a bit long than you'd need, but my car is slightly different
[Edited on 13/8/10 by blakep82]
Thanks for the tip.
Soo, next question. Once i have placed the engine/box and the diff. Where do i measure from to find what length prop i need?
I think alot of cars use 900mm long shafts, but my dax one is about half that
quote:
Originally posted by nnrouty
Thanks for the tip.
Soo, next question. Once i have placed the engine/box and the diff. Where do i measure from to find what length prop i need?
quote:
Originally posted by James
quote:
Originally posted by nnrouty
Thanks for the tip.
Soo, next question. Once i have placed the engine/box and the diff. Where do i measure from to find what length prop i need?
Your prop manufacturer will tell you where to measure from.
quote:
Originally posted by nnrouty
i had thought about a type 9. Was hoping that mabe some body would make a prop shaft that would br suitable that i could buy off the shelf.
I am using a 1300 crossflow, if i was to use a type 9 would i get a reasonable amout of power from this setup?
ive got one in the garage which i removed from my car when i fitted my redtop, the car was running a 1300 gt with 4 sd box if its any good to you?