Wadders
|
posted on 18/1/09 at 04:21 PM |
|
|
Will a Caterham Nosecone fit an ST?
Anyone know if a caterham S3 Nose will be anywhere close to fitting a Stuart Taylor?
Cheers
Al.
|
|
|
piddy
|
posted on 18/1/09 at 04:45 PM |
|
|
Not 100% sure but I would say no.
|
|
BenB
|
posted on 18/1/09 at 04:51 PM |
|
|
The Cat screen fits the STM scuttle but I'm not sure what happens downstream of that!! I think not...
|
|
Wadders
|
posted on 18/1/09 at 04:54 PM |
|
|
Mmm, just been searching the LB archives, and there seems to be some division of opinion on the matter, some say yes some say no.
In the end i'm no wiser
Al.
Originally posted by piddy
Not 100% sure but I would say no.
|
|
MikeR
|
posted on 18/1/09 at 05:17 PM |
|
|
the caterham is approx the same sized bodywork as the ST (actually i suppose that's the other way round).
Caterham do the front end differently to the stuart taylor so you *may* find its wide enough but it *may* not follow top to bottom line of the ST
chassis.
|
|
DavidM
|
posted on 18/1/09 at 05:53 PM |
|
|
I believe LocoR1 has a Caterham nose on his book locost and that fits nice. I think the ST chassis is the same dimensions as the book locost, so it
should fit fine.
David
Proportion is Everything
|
|
locoR1
|
posted on 18/1/09 at 05:57 PM |
|
|
Did somebody call ![](/images//smilies/bigsmile.gif)
I would say it would be very close If you want me to measure mine let me know what you want hight and width at bonnet edge?
[Edited on 18/1/09 by locoR1]
![](/galpreviews/cafe racer 1.jpg) ![Description](/gallery/cafe racer 1.jpg) Description
Check out my CB500T Cafe Racer build diary
|
|