prawnabie
|
| posted on 12/7/09 at 09:48 AM |
|
|
Bonnet scoops
Right,
We know that most manufacturers used the kia scoop as a model for there own design, has anyone managed to buy one seperately from MK/MNR/carbon mods
etc or do they come moulded to the bonnet.
If so, can somebody kindly measure the front and back dimensions and length for me as i am having great difficutly getting this info off the kit car
manufacturers themselves!
Ta
Shaun
|
|
|
|
|
mads
|
| posted on 12/7/09 at 09:55 AM |
|
|
Shaun.
If noone gets back to you, you are welcome to pop over to mine and get all the dimensions you need - I got a bonnet with the bulge from MK.
We gain knowledge faster than we do wisdom!
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in
sideways, thoroughly used, totally worn out and loudly proclaiming... "f*ck, what a trip!"
|
|
|
prawnabie
|
| posted on 12/7/09 at 09:55 AM |
|
|
thanks mads!
|
|
|
omega0684
|
| posted on 12/7/09 at 09:55 AM |
|
|
the carbon mods one comes separate from the bonnet and you get a fitting kit with it as well
ps, the dimensions of the scoop are on the carbon mods site
[Edited on 12/7/09 by omega0684]Link to
Carbonmods
length 530mm, width 530mm, height 67mm
HTH's
Alex
[Edited on 12/7/09 by omega0684]
|
|
|
prawnabie
|
| posted on 12/7/09 at 09:58 AM |
|
|
I was all for ordering a carbon mods one and getting it sprayed but I emailed them for more specific measurements 3 times and they never answered me!
|
|
|
omega0684
|
| posted on 12/7/09 at 10:00 AM |
|
|
i found it better to ring them direct, they were more than helpful on the phone.
|
|
|
prawnabie
|
| posted on 12/7/09 at 10:04 AM |
|
|
I take it the 530 width is the widest part at the back?
Anybody got one of these who can measure the front width for me? - saves me waiting till tomorrow lol
|
|
|
