Bumble
|
| posted on 1/2/10 at 02:20 PM |
|
|
Aluminium Trim Suppliers
Been looking for some suitable ally trim profiles recently and seen a few posts on here asking the same. Woolies been recommended but didn't
have the profile I was after. Anyway found this company who have lots of different shapes n sizes so hope it helps someone else.
http://www.clickmetal.co.uk/Angle-Types/Mouldings/Aluminium-Cope-Mouldings/p-16-8-16/
Cheers,
Matt
PS - can soemone tell me how to do the LINK thing!!
|
|
|
|
|
blakep82
|
| posted on 1/2/10 at 02:27 PM |
|
|
doing a link is easy. click this button
 and it does it all for you
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
scootz
|
| posted on 1/2/10 at 02:55 PM |
|
|
Looks Handy... cheers Matt!
It's Evolution Baby!
|
|
|
Bluemoon
|
| posted on 1/2/10 at 04:11 PM |
|
|
Great site, how did your order go? Might use them for some bit's and bobs.. Tread plates not to expensive...
Dan
[Edited on 1/2/10 by Bluemoon]
|
|
|
spiderman01980
|
| posted on 1/2/10 at 08:15 PM |
|
|
http://www.aluminiumwarehouse.co.uk/
2000 mm x 1000 mm x 1.5 mm - Grade 1050 At click metal its £47.25 with VAT and at Aluminiumwarehouse its £30.08 with VAT can someone check this out
incase am wrong!
[Edited on 1-2-10 by spiderman01980]
|
|
|
Bumble
|
| posted on 1/2/10 at 08:48 PM |
|
|
Not checked price but I bought all my sheet ally from Aluminium Warehouse...they were the cheapest I could find but don't do the edging trim
profiles I was after. EA Horsebox used to do it but have now stopped and Woolies were the only other I'm aware of that could provide the
"hockey stick" profile for example. For sheets I'm sure Ally Warehouse are best value.
|
|
|
