RK
|
| posted on 3/4/10 at 04:10 PM |
|
|
windscreen needed
Is it possible to ship a windscreen with E-marked glass, to Canada? Mine failed it's inspection due to lack of markings on it and it's
going to cost a small fortune to have another one put in. Might be easier to just get another one or borrow one.
Anybody know anybody in Ontario/Quebec who can loan me one?
|
|
|
|
|
skodaman
|
| posted on 3/4/10 at 04:16 PM |
|
|
Cheaper to just send you a sticker from the scrappies and u put it on your screen.
Skodaman
|
|
|
graememk
|
| posted on 3/4/10 at 04:31 PM |
|
|
get a local sign company to make you a vynal template and then buy a post code etch marking kit from the bay....
|
|
|
RK
|
| posted on 3/4/10 at 04:50 PM |
|
|
How would I find out what needs to be etched? They appear to be right in the glass when I look on tin tops.
|
|
|
Canada EH!
|
| posted on 3/4/10 at 05:21 PM |
|
|
Try Kinetic Vehicles in Oregon, they sell USA approved windshields. By the way who is doing your inspections the MOT?
|
|
|
RK
|
| posted on 4/4/10 at 10:18 PM |
|
|
An authorised government garage in Hull. I need to go to one of the ones that apparently knows something about these cars. This one didn't as it
turned out, and was incredibly negative about the car, although all they could find wrong was
1. Front reflector was white, instead of orange
2. Glass not marked.
I was quite discouraged actually, although the car was obviously fairly well presented. Now i need to wait to hear back from the provincial
engineering department, as to whether I need further engineering certificates or not.
|
|
|
