Benzine
|
| posted on 23/4/10 at 04:58 PM |
|
|
Cycle wing fitting
Back when I first put my MK on the road I used the newer cycle wings with the extra tab bits that make them easier to fit. I don't have those
anymore but I still have the first cycle wings that came with my original kit. I'd like to fit these as it will save me £££. Has anyone fit
cycle wings like this?
^ Pic on left is where the bracket goes under the wing (would require lots of bending) and the pic on the right is where you'd dremel a slot
into the wing and have one simple bend. (Green bits are the cycle wings)
I've no idea if it'll work/look naff etc
[Edited on 23/4/10 by Benzine]
|
|
|
|
|
mangogrooveworkshop
|
| posted on 23/4/10 at 05:11 PM |
|
|
mines on the left and dave has them like youve drawn on the right....makes no differance
|
|
|
Benzine
|
| posted on 23/4/10 at 05:45 PM |
|
|
gravy. thanks ^__^
|
|
|
jacko
|
| posted on 23/4/10 at 07:51 PM |
|
|
Mine is like the one on the left there not that hard to bend
Jacko
|
|
|
ReMan
|
| posted on 23/4/10 at 11:08 PM |
|
|
I gave up trying the one on the left and bought mac1 wings and stays
|
|
|
Hellfire
|
| posted on 24/4/10 at 01:38 PM |
|
|
Our first ones were as the pic on the left and were a b@stard to bend and get right. Our second ones were as the pic on the right. Much easier to
fit....
Phil
|
|
|
