myke pocock
|
| posted on 23/8/10 at 06:27 PM |
|
|
Wiper Problem
Made the screen (Lolocost frame) and fitted the wiper mechanism (BMC Mini system.) Problem is that as the sides of the screen frame are at quite an
angle the wiper blade on the drivers side sweeps right off the screen frame. PILLOCK!!! Have tried to bend the arms etc but to no avail. SO, make a
new screen (NO) reposition the wiper box by drilling another hole in the scuttle top (Possible but leaves a nasty hole to cover) or replace the
existing gear wheel which is 110 degrees with a 90 degree gear wheel which I believe is available. Does anyone have a spare they would sell me or
where do I get one. Message to self, measure twice, cut once!!! I should know as I teach it to students!!! 
|
|
|
|
|
britishtrident
|
| posted on 23/8/10 at 06:57 PM |
|
|
Looks like a 90degree crank-gear is best option
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
|
myke pocock
|
| posted on 23/8/10 at 09:29 PM |
|
|
Where do I get them from then?
|
|
|
RK
|
| posted on 23/8/10 at 09:48 PM |
|
|
CBS might have them. They are very good to deal with.
|
|
|
David Jenkins
|
| posted on 24/8/10 at 06:37 AM |
|
|
I think SVC sell them as well.
|
|
|
